Carrier Access Network Device Axxius 800 Bedienungsanleitung PDF herunterladen (Seite 264)

100

101

5-164 Axxius 800 - Release 2.2

CLI Commands

set

set (router-wan) stp port cost

Use the set (router-wan) stp port cost command to configure Spanning Tree path cost

value for this bridge port.

Syntax: set {rtr_card-addr} {"wan-name"} stp port cost

{port-cost-value}

Example: set 3 stp port cost 650

The example sets the Spanning Tree port cost value at 650, on the Router card

in slot 3.

{rtr_card-addr}

The slot number (1-8) that contains the Router card.

{"wan-name"}

The WAN interface to modify. The name must be enclosed in quotes.

{port-cost-value}

The value can range from 1 to 65535, with higher values representing slower data paths. A

value of 15625/# of DS0s is recommended.

set (router-wan) stp port priority

Use the set (router-wan) stp port priority command to configure Spanning Tree priority

value for this bridge port.

Syntax: set {rtr_card-addr} {"wan-name"} port priority

{port-priority-value}

Example: set 3 stp port priority 128

The example sets the Spanning Tree port priority to 128, on the Router in slot 3.

{rtr_card-addr}

The slot number (1-8) that contains the Router card.

{"wan-name"}

The WAN interface to modify. The name must be enclosed in quotes.

{port-priority-value}

The value can range from 0 to 255 seconds, with a default of 128.

1 2 ... 259 260 261 262 263 264 265 266 267 268 269 ... 567 568

Kommentare zu diesen Handbüchern

Keine Kommentare

Carrier Access Network Device Axxius 800 Bedienungsanleitung Seite 264

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Carrier Access Network Device Axxius 800