Carrier Access Network Device Axxius 800 Bedienungsanleitung PDF herunterladen (Seite 192)

100

101

5-92 Axxius 800 - Release 2.2

CLI Commands

set

set login support

Use the set login support command to enable or disable the internal login accounts for Carrier

Access Support personnel for the Controller and Router cards.

Syntax: set login support {disable|enable}

Example: set login support disable

The example will prohibit logins via Carrier Access Support passwords.

{disable|enable}

set lsbackup

Use the set lsbackup commands to define the backup protection slot. The service card in this

slot must be a hardened Quad T1 service card and can be in any of the 8 Axxius service card

slots.

Syntax: set lsbackup {t1_card-addr} [remove]

Example: set lsbackup 8

Example: set lsbackup 8 remove

{t1_card-addr}

The slot number (1-8) that contains a hardened Quad T1 Service card to be used as backup.

Note: only one card may be defined as the backup protection card. If this command

is applied to a second slot the following message will appear:

*-New Backup slot cannot be assigned--old assignment must be

removed first.

To change the backup protection card, a set lsbackup {slot} remove command must be

applied first.

[remove]

This setting will stop the defined T1 service card as a backup card. Note: the correct slot

for the current backup protection card must be used.

disable Prohibit logins via Carrier Access Support passwords.

enable Allow logins via Carrier Access Support passwords.

1 2 ... 187 188 189 190 191 192 193 194 195 196 197 ... 567 568

Kommentare zu diesen Handbüchern

Keine Kommentare

Carrier Access Network Device Axxius 800 Bedienungsanleitung Seite 192

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Carrier Access Network Device Axxius 800