Carrier Access Network Device Axxius 800 Bedienungsanleitung PDF herunterladen (Seite 221)

100

101

Axxius 800 - Release 2.2 5-121

CLI Commands

set

set (router) port prompt

Use the set (router) port prompt command to set the authentication prompt on a TSR port.

Syntax: set {tsr_card-addr} port {port-number} prompt

{disable|enable}

Example: set 1 port 2 prompt enable

This command will enable the authentication prompt for port 2 on the TSR card

in slot 1.

{tsr_card-addr}

The slot number (1-8) that contains the TSR card.

{port-number}

The port number (1-4) of the TSR card.

{disable|enable}

set (router) port protocolport

Use the set (router) port protocolport command to set the protocol port on a TSR port.

Syntax: set {tsr_card-addr} port {port-number} protocolport

{protocol-port}

Example: set 1 port 2 protocolport 1024

This command will set the protocol port to 1024 for port 2 on the TSR card in

slot 1.

{tsr_card-addr}

The slot number (1-8) that contains the TSR card.

{port-number}

The port number (1-4) of the TSR card.

{protocol-port}

The protocol port range is 1 - 65525. 0 is the wildcard, any port designator.

disable Disable the Authentication Prompt on a TSR port

enable Set the Authentication Prompt on a TSR port

1 2 ... 216 217 218 219 220 221 222 223 224 225 226 ... 567 568

Kommentare zu diesen Handbüchern

Keine Kommentare

Carrier Access Network Device Axxius 800 Bedienungsanleitung Seite 221

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Carrier Access Network Device Axxius 800