Carrier Access Network Device Axxius 800 Bedienungsanleitung PDF herunterladen (Seite 214)

100

101

5-114 Axxius 800 - Release 2.2

CLI Commands

set

set (router) ntp timezone

Use the set (router) ntp timezone command to specify the timezone offset relative to GMT

for this TSR.

Note: not operational in this release.

Syntax: set {rtr_card-addr} ntp timezone {hour-offset}

[minute-offset]

Example: set 1 ntp timezone -5

The example will specify the gateway time to be 5 hours from GMT (Greenwich

Mean Time), which equates to Eastern Standard time, for the Router in slot 1.

{rtr_card-addr}

The slot number (1-8) that contains the Router card.

{hour-offset}

Used to calculate gateway time from GMT. The hour-offset range is -12 to 12.

[minute-offset]

Used to calculate gateway time from GMT. The minute-offset range is 0 to 60.

set (router) password

Use the set (router) password command to manage password access on the specified Router

card.

Syntax: set {rtr_card-addr} password {setting} {"password"}

Example: set 5 password view "Fred"

The example will set the password to the view level to "Fred" on the Router card

in slot 5.

{rtr_card-addr}

The slot number (1-8) that contains the Router card.

{setting}

{"password"}

A password with a maximum of 15 characters. Password must be enclosed in quotes, and

is case-sensitive.

admin Set Administration level password on the Router.

config Set Configuration level password on the Router.

security Set Security level password on the Router.

view Set View level password on the Router.

1 2 ... 209 210 211 212 213 214 215 216 217 218 219 ... 567 568

Kommentare zu diesen Handbüchern

Keine Kommentare

Carrier Access Network Device Axxius 800 Bedienungsanleitung Seite 214

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Carrier Access Network Device Axxius 800