Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca Bedienungsanleitung Seite 476

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 496
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 475
25-16 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI
Configuration - Voice Service SIP Mode
redundancy ttl
Use the Voice Service SIP redundancy ttl command to set the set the SRV Time To Live (TTL) option.
The TTL is a set interval of time between flushing the SRV cache.
Syntax: (config-voice-serv-sip)# redundancy ttl seconds
Example: (config-voice-serv-sip)# redundancy ttl 900
Supported Platforms:
Adit 3104, Adit 3500, MSR
redundancy type
Use the Voice Service SIP redundancy type command to configure the redundancy type.
Syntax: (config-voice-serv-sip)# redundancy type {none|srv|user}
Example: (config-voice-serv-sip)# redundancy type none
Supported Platforms:
Adit 3104, Adit 3500, MSR
Field Definition
seconds Range 0 - 3600 seconds, with a default of 3600.
Field Definition
none Redundancy feature is disabled. Default.
srv An SRV lookup will be performed using the main proxy. The hosts/
IPs found are used to form the proxy redundancy list.
user The SIP messages will be sent to the primary proxy. If there is a failure
it will be sent to the secondary proxy.
Seitenansicht 475
1 2 ... 471 472 473 474 475 476 477 478 479 480 481 ... 495 496

Kommentare zu diesen Handbüchern

Keine Kommentare