Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca Bedienungsanleitung PDF herunterladen (Seite 465)

100

101

Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI 25-5

Configuration - Voice Service SIP Mode

end

Use the end command to exit the current configuration mode, and must be used to mark the end of any

configuration file. This command can be entered in any configuration mode with the same result.

Syntax: (config-voice-serv-sip)# end

Example: (config-voice-serv-sip)# end

Supported Platforms:

Adit 3104, Adit 3500, MSR

exit

Use the exit command to close your current connection if you are in the User mode, or Privileged mode.

If the command is entered in a subconfiguration mode (Interface or Routing), this command takes you

to the next higher level (example: back to Privileged mode from Interface configuration mode).

Syntax: (config-voice-serv-sip)# exit

Example: (config-voice-serv-sip)# exit

(config)#

Supported Platforms:

Adit 3104, Adit 3500, MSR

1 2 ... 460 461 462 463 464 465 466 467 468 469 470 ... 495 496

Kommentare zu diesen Handbüchern

Keine Kommentare

Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca Bedienungsanleitung Seite 465

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca