Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca Bedienungsanleitung PDF herunterladen (Seite 322)

100

101

14-2 Adit 3000 (Rel. 1.6) and MSR Card (Rel 2.0) CLI

Configuration - IPSec Mode

aggressive-mode

Use the IPSec aggressive-mode command to set to aggressive mode, instead of main mode. To set to

main mode, see no aggressive-mode command on page 14-12.

Syntax: (config-ipsec {n})# aggressive-mode

Example: (config-ipsec-1)# aggressive-mode

Supported Platforms:

Adit 3104, Adit 3200, Adit 3500, MSR

authentication

Use the IPSec authentication command to specify a peer authentication method.

Syntax: (config-ipsec {n})# authentication {pre-share shared-key|rsa-sig

rsa-signature|cert local-id peer-id}

Example: (config-ipsec-1)# authentication pre-share mysecret

Supported Platforms:

Adit 3104, Adit 3200, Adit 3500, MSR

description

Use the IPSec description command to enter a description for the connection.

Syntax: (config-ipsec {n})# description description

Example: (config-ipsec-1)# description Boulder VPN IPSec0

Supported Platforms:

Adit 3104, Adit 3200, Adit 3500, MSR

Field Definition

pre-shared Specifies preshared keys as the authentication method.

shared-key- Enter the Pre-share key.

rsa-sig Specifies RSA signatures as the authentication method.

rsa-signature - Enter the RSA signature.

cert Set Certificate for local ID and Peer ID.

local-id - Enter the local ID.

peer-id - Enter the peer ID.

Field Definition

description Enter a description, with a maximum of 64 characters.

1 2 ... 317 318 319 320 321 322 323 324 325 326 327 ... 495 496

Kommentare zu diesen Handbüchern

Keine Kommentare

Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca Bedienungsanleitung Seite 322

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Carrier-access Adit 3000 Series and Multi-Service Router (MSR) Ca