Carrier Access CMG Router Bedienungsanleitung PDF herunterladen (Seite 196)

7-10 CMG Router - Release 2.7

Verification Window

Port Monitor

3. Press [ENTER]. The Port Monitor window will display.

Port Name:

Select the Port Name, by scrolling through the list of (LAN Port, Remote Units) with the

[SPACEBAR].

Start Monitor

Use this prompt to initiate the packet trace. Select START MONITOR - > and press [ENTER]

to begin the trace. As the transmission occurs, the packet hex dump will be displayed on the

screen.

If you wish, you may end the trace at any point. Press

[ESC] to terminate.

Trap On

Use this field to define what traps to turn on. <All>, <ARP/RARP>, <ALL IP, <IP ADDR#>,

<All UDP>, <UDP Port# >, <RIP>, <STP>, <IPX>, <ICMP>, <MGCP>, <RTP>,

<BLOCK TCP>. Note: With <UDP Port#>, a port number (range: 0 - 65535) is entered. With

<IP ADDR#> an IP Address is entered.

Number of bytes to display for each packet:

Use this field to enter the number of bytes to display for each packet. The range is 0-512.

Direction

Use this field to define the direction to trace. <Both>, <Transmit> or <Receive>.

1 2 ... 191 192 193 194 195 196 197 198 199 200 201 ... 295 296

Keine Kommentare

Carrier Access CMG Router Bedienungsanleitung Seite 196