Carrier Access Network Device Axxius 800 Bedienungsanleitung PDF herunterladen (Seite 28)

30 Axxius 800 - Release 2.2

Quick Start

Connector Pinouts

Quad T1/ADPCM Cards RJ-48 Connector

There are four RJ-48 (female) connectors on the front of the Quad

T1 and Quad DS1 ADPCM Card.

The pinouts are as follows:

TSR Card 10/100Base-TX Ethernet

There are four RJ-45C (female) connectors on the front of the

Quad TSR Card.

The pinout is as follows:

Ethernet (RJ-45C)

Pin Name Description

1 Receive Ring Receive from DS1 network

2 Receive Tip Receive from DS1 network

3 n/c Not connected

4 Transmit Ring To DS1 network

5 Transmit Tip To DS1 network

6 - 7 n/c Not connected

8 Chassis Ground

Pin 10/100Base-TX

Signals

RS-232 Signals

1 Transmit + (output) CTS (input)

2 Transmit - (output) RTS (input)

3 Receive + (input) DSR (input)

4 n/c TXD (output)

5 n/c RXD (input)

6 Receive - (input) DCD (input)

7 n/c DTR (output)

8 n/c Signal ground

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 51 52

Keine Kommentare

Carrier Access Network Device Axxius 800 Bedienungsanleitung Seite 28