Carrier Access CMG Router Bedienungsanleitung PDF herunterladen (Seite 15)

Adit 600 - Release 10.1.1 13

Quick Start

Interface Connectors

Power Reset

This is a resetable circuit breaker. If at any time there is a short or power

surge on the incoming AC/DC line, the breaker will trip to protect the

Power supply from damage.

Power Connections

There are four power supplies available for the Adit 600.

 115 VAC/-48 VDC

 230 VAC/-48 VDC

 24/-48 VDC

 24 VDC with -48 Output

These power supplies have different connectors as shown in the following. For

additional information, see Chapter 15, Power Supply of the Adit 600 User Manual.

Fuse Recommendation

When using -48 VDC input power, use a 3.5 Amp fast-acting fuse if the power

connector is wired to a fuse panel.

Power Cord AC

An AC Power cord is provided with the 115 VAC and the

230 VAC Power Supplies.

To connect the Power Cord:

1. Insert power cord (male-end) to AC power source.

2. Plug connector into the Adit 600.

3. A green light should appear on the DC Input LED on the front of the Power

Supply.

AC Power Connector

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 53 54

Keine Kommentare

Carrier Access CMG Router Bedienungsanleitung Seite 15