Carrier-access Terminal Server Router Bedienungsanleitung PDF herunterladen (Seite 8)

8 Terminal Service Router - Release 1.3

Quick Start Guide

Internet Connection using PPP, NAT/PAT and Firewall Filters

Command Description

add 1 "wan1" firewall 2 pass

inout nolog ping

192.168.21.14/32

xxx.xxx.xxx.xxx/32

Adds a Firewall rule to the WAN. Where

xxx.xxx.xxx.xxx is the host’s IP address at the far

end that will be able to ping or telnet to the router.

0.0.0.0/0 will allow any other host at the far end

to ping and/or telnet to the router.

add 1 "wan1" firewall 3 pass

inout nolog ping 0.0.0.0/0

0.0.0.0/0

Adds a Firewall rule to the WAN.

add 1 "wan1" firewall 4 pass

inout nolog tcp 1-65535 0.0.0.0/0

0.0.0.0/0

Adds a Firewall rule to the WAN.

add 1 "wan1" firewall 5 pass

inout nolog udp 1-65535 0.0.0.0/0

0.0.0.0/0

Adds a Firewall rule to the WAN.

set 1 "wan1" trunk 1 Set the WAN interface named "wan1" to be

mapped to trunk 1

reset 1 Reboot the router, to enable all configurations set

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Keine Kommentare

Carrier-access Terminal Server Router Bedienungsanleitung Seite 8