Carrier-access Access Navigator Bedienungsanleitung Seite 1

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Hardware Carrier-access Access Navigator herunter. Carrier Access Access Navigator User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 704
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
Access Navigator
USER MANUAL
Part Number: 770-0079-AP
Product Release: 1.8
August 2003
Seitenansicht 0
1 2 3 4 5 6 ... 703 704

Inhaltsverzeichnis

Seite 1 - Access Navigator

Access NavigatorUSER MANUALPart Number: 770-0079-APProduct Release: 1.8August 2003

Seite 2

1x August 2003 Access Navigator - Release 1.8PrefaceWarranty Product ReturnsBefore returning any equipment to Carrier Access, first contact the distri

Seite 3 - In this Preface

5-18 August 2003 Access Navigator - Release 1.8Physical InstallationAttach Access Navigator to PlywoodFigure 5-10. Access Clearance RequirementsContro

Seite 4 - Compliance

Access Navigator - Release 1.8 August 2003 5-19 Physical InstallationAttach Access Navigator to PlywoodFigure 5-11. Plywood Sheet, Minimum SizePlywood

Seite 5

5-20 August 2003 Access Navigator - Release 1.8Physical InstallationAttach Access Navigator to PlywoodFigure 5-12. Mounting Hole Pattern on Plywood18

Seite 6 - Title and Risk

Access Navigator - Release 1.8 August 2003 5-21 Physical InstallationAttach Access Navigator to PlywoodFigure 5-13. Wall Mount Bracket InstallationPos

Seite 7 - Limitation of Liability

5-22 August 2003 Access Navigator - Release 1.8Physical InstallationAttach Access Navigator to Plywood

Seite 8 - Jurisdiction and Venue

CHAPTERElectrical InstallationIn this Chaptern Compliance and Safety Requirements ... 6-2n Static-Sensitive Equipment Handling Procedures ... 6-3n Too

Seite 9

6-2 August 2003 Access Navigator - Release 1.8Electrical InstallationCompliance and Safety RequirementsCompliance and Safety RequirementsDANGER! FIR

Seite 10 - Warranty Product Returns

Access Navigator - Release 1.8 August 2003 6-3 Electrical InstallationStatic-Sensitive Equipment Handling ProceduresStatic-Sensitive Equipment Handlin

Seite 11 - TABLE OF CONTENTS

6-4 August 2003 Access Navigator - Release 1.8Electrical InstallationTools and Materials Required7. Always store circuit cards in an anti-static stora

Seite 12 - Table of Contents

Access Navigator - Release 1.8 August 2003 6-5 Electrical InstallationChassis Ground ConnectionChassis Ground ConnectionInstallation Summaryn Precauti

Seite 13 - Table of Contents

TABLE OF CONTENTSPrefaceCompliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ivNotices . .

Seite 14 - 6 Electrical Installation

6-6 August 2003 Access Navigator - Release 1.8Electrical InstallationRun Ground Wire to Access NavigatorRun Ground Wire to Access Navigator1. Measure

Seite 15

Access Navigator - Release 1.8 August 2003 6-7 Electrical InstallationAttach Ground Lug to Access NavigatorAttach Ground Lug to Access NavigatorWARNIN

Seite 16

6-8 August 2003 Access Navigator - Release 1.8Electrical InstallationDSX-1 Cable ConnectionsDSX-1 Cable ConnectionsInstallation Summaryn Precautions .

Seite 17 - 9 Provision DCS Service

Access Navigator - Release 1.8 August 2003 6-9 Electrical InstallationTools and MaterialsTools and Materials1. Obtain the following tools:• Screwdrive

Seite 18 - 10 Provision GR-303 Service

6-10 August 2003 Access Navigator - Release 1.8Electrical InstallationPrepare DSX-1 CablesFigure 6-3. DSX-1 Cable with Two Connectors (PN 005-0025)2.

Seite 19

Access Navigator - Release 1.8 August 2003 6-11 Electrical InstallationConnect DSX-1 Cables to Access NavigatorConnect DSX-1 Cables to Access Navigato

Seite 20 - 14 Alarm Clearing

6-12 August 2003 Access Navigator - Release 1.8Electrical InstallationConnect DSX-1 Cables to Access Navigator6. Connect DSX-1 transmit (output) inter

Seite 21

Access Navigator - Release 1.8 August 2003 6-13 Electrical InstallationConnect DSX-1 Cables to Access NavigatorAttach Ferrite BeadsWARNING! NEBS REQ

Seite 22 - 16 Maintenance Procedures

6-14 August 2003 Access Navigator - Release 1.8Electrical InstallationConnect DSX-1 Cables to Interface or Patch PanelConnect DSX-1 Cables to Interfac

Seite 23 - 18 CLI Language Reference

Access Navigator - Release 1.8 August 2003 6-15 Electrical InstallationConnect DSX-1 Cables to Interface or Patch PanelTable 2-1 . DSX-1 Cable Pin Con

Seite 24

1xii August 2003 Access Navigator - Release 1.8Table of ContentsConfiguration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Seite 25

6-16 August 2003 Access Navigator - Release 1.8Electrical InstallationConnect DSX-1 Cables to Interface or Patch Panel13 45black/green13green/black45b

Seite 26

Access Navigator - Release 1.8 August 2003 6-17 Electrical InstallationRS-232 Management ConnectionRS-232 Management ConnectionInstallation Summaryn P

Seite 27 - A EOC Interface

6-18 August 2003 Access Navigator - Release 1.8Electrical InstallationInformation, Tools, and MaterialsFigure 6-7. RS-232 DTE-to-DTE Cable Connections

Seite 28 - C SNMP Interface

Access Navigator - Release 1.8 August 2003 6-19 Electrical InstallationConnect Shielded RS-232 CableFigure 6-8. RS-232 DCE-to-DCE Modem Cable Connecti

Seite 29 - Introduction

6-20 August 2003 Access Navigator - Release 1.8Electrical InstallationAttach Ferrite Bead RF SuppressorAttach Ferrite Bead RF SuppressorCAUTION! SHI

Seite 30 - Overview

Access Navigator - Release 1.8 August 2003 6-21 Electrical InstallationPreconfigure Optional ModemPreconfigure Optional Modem1. If a modem is to be co

Seite 31 - Features and Benefits

6-22 August 2003 Access Navigator - Release 1.8Electrical InstallationEthernet Management ConnectionEthernet Management ConnectionNOTE: An Ethernet c

Seite 32 - System Architecture

Access Navigator - Release 1.8 August 2003 6-23 Electrical InstallationMake Ethernet Cable (Optional)crossover cable can be used to directly connect t

Seite 33 - Access Banks

6-24 August 2003 Access Navigator - Release 1.8Electrical InstallationConnect Ethernet Cable to Access NavigatorConnect Ethernet Cable to Access Navig

Seite 34 - Management

Access Navigator - Release 1.8 August 2003 6-25 Electrical InstallationExternal Timing Source (BITS) ConnectionExternal Timing Source (BITS) Connectio

Seite 35 - Introduction

Access Navigator - Release 1.8 August 2003 1xiii Table of ContentsEnvironmental. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Seite 36

6-26 August 2003 Access Navigator - Release 1.8Electrical InstallationMake BITS Cable (Optional)Make BITS Cable (Optional)To make an RJ48C timing inpu

Seite 37

Access Navigator - Release 1.8 August 2003 6-27 Electrical InstallationAlarm Output ConnectionsAlarm Output ConnectionsInstallation Summaryn Precautio

Seite 38

6-28 August 2003 Access Navigator - Release 1.8Electrical InstallationWire Alarm Output ConnectorWire Alarm Output Connector1. Open package containing

Seite 39

Access Navigator - Release 1.8 August 2003 6-29 Electrical InstallationWire Alarm Output ConnectorFigure 6-16. Typical Connections to Facility Alarm S

Seite 40

6-30 August 2003 Access Navigator - Release 1.8Electrical InstallationPlug Output Alarm Connector into Access NavigatorPlug Output Alarm Connector int

Seite 41

Access Navigator - Release 1.8 August 2003 6-31 Electrical InstallationAlarm Input ConnectionsAlarm Input ConnectionsInstallation Summaryn Precautions

Seite 42 - Configuration

6-32 August 2003 Access Navigator - Release 1.8Electrical InstallationWire Alarm Input ConnectorWire Alarm Input Connector1. Open package containing a

Seite 43 - Specifications

Access Navigator - Release 1.8 August 2003 6-33 Electrical InstallationWire Alarm Input ConnectorNOTE: Figure 6-21 shows the alarm input connector wi

Seite 44 - Protocols

6-34 August 2003 Access Navigator - Release 1.8Electrical InstallationPlug Alarm Input Connector into Access NavigatorPlug Alarm Input Connector into

Seite 45 - Physical

Access Navigator - Release 1.8 August 2003 6-35 Electrical InstallationDC Power ConnectionsDC Power ConnectionsInstallation Summaryn Precautions ... 6

Seite 46 - Compliance Requirements

1xiv August 2003 Access Navigator - Release 1.8Table of Contents5 Physical InstallationCompliance and Safety Requirements . . . . . . . . . . . . . .

Seite 47 - UL Requirements

6-36 August 2003 Access Navigator - Release 1.8Electrical InstallationWire Power ConnectorsWire Power ConnectorsDANGER! HIGH VOLTAGE SHOCK HAZARD. D

Seite 48 - Ordering Information

Access Navigator - Release 1.8 August 2003 6-37 Electrical InstallationVerify Wiring7. Orient the connector as shown in Figure 6-23 and loosen the rig

Seite 49

6-38 August 2003 Access Navigator - Release 1.8Electrical InstallationDress Cables and WiresDress Cables and WiresInstallation Summaryn Tools and Mate

Seite 50

Access Navigator - Release 1.8 August 2003 6-39 Electrical InstallationAcceptance TestAcceptance TestVerification Summaryn Apply Power and Verify Oper

Seite 51

6-40 August 2003 Access Navigator - Release 1.8Electrical InstallationApply Power and Verify OperationApply Power and Verify Operation1. Apply –48 VDC

Seite 52 - GR-303 Services

Access Navigator - Release 1.8 August 2003 6-41 Electrical InstallationVerify Chassis Ground ConnectionVerify Chassis Ground ConnectionFollow standard

Seite 53

6-42 August 2003 Access Navigator - Release 1.8Electrical InstallationVerify RS-232 Management ConnectionVerify RS-232 Management ConnectionNOTE: Sec

Seite 54 - DCS Services

Access Navigator - Release 1.8 August 2003 6-43 Electrical InstallationVerify Ethernet Cable ConnectionVerify Ethernet Cable ConnectionVerify Ethernet

Seite 55 - Management Architecture

6-44 August 2003 Access Navigator - Release 1.8Electrical InstallationVerify BITS ConnectionVerify BITS Connection1. Ensure that BITS input cable is c

Seite 56 - FDL Management

Access Navigator - Release 1.8 August 2003 6-45 Electrical InstallationVerify Alarm Output ConnectionsVerify Alarm Output ConnectionsCAUTION! MAXIMU

Seite 57

Access Navigator - Release 1.8 August 2003 1xv Table of ContentsDSX-1 Cable Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Seite 58

6-46 August 2003 Access Navigator - Release 1.8Electrical InstallationVerify Alarm Output Connections2. Verify major output alarm functions as follows

Seite 59

Access Navigator - Release 1.8 August 2003 6-47 Electrical InstallationVerify Alarm Input ConnectionsVerify Alarm Input ConnectionsNOTE: Alarm inputs

Seite 60 - DCS Signaling

6-48 August 2003 Access Navigator - Release 1.8Electrical InstallationExit Management SessionExit Management SessionNOTE: You will remain logged into

Seite 61

Access Navigator - Release 1.8 August 2003 6-49 Electrical InstallationInstall Redundant Controller CardInstall Redundant Controller CardThis procedur

Seite 62

6-50 August 2003 Access Navigator - Release 1.8Electrical InstallationTools and MaterialsTools and MaterialsObtain the following tools and materials.•

Seite 63

Access Navigator - Release 1.8 August 2003 6-51 Electrical InstallationRemove Front CoverRemove Front CoverDANGER! BURN HAZARD. CHASSIS, COVER SCREW

Seite 64

6-52 August 2003 Access Navigator - Release 1.8Electrical InstallationInstall Controller CardInstall Controller Card1. Locate Controller B card slot (

Seite 65

Access Navigator - Release 1.8 August 2003 6-53 Electrical InstallationVerify OperationVerify Operation1. Wait two minutes for new Controller card to

Seite 66

6-54 August 2003 Access Navigator - Release 1.8Electrical InstallationVerify Operation6. Verify that status indicators now show Controller B is active

Seite 67

Access Navigator - Release 1.8 August 2003 6-55 Electrical InstallationInstall Additional Quad T1 Framer CardsInstall Additional Quad T1 Framer CardsT

Seite 68

1xvi August 2003 Access Navigator - Release 1.8Table of ContentsDress Cables and Wires. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Seite 69

6-56 August 2003 Access Navigator - Release 1.8Electrical InstallationRemove Front CoverRemove Front CoverDANGER! BURN HAZARD. CHASSIS, COVER SCREWS

Seite 70 - P-Phone Services

Access Navigator - Release 1.8 August 2003 6-57 Electrical InstallationInstall Quad T1 Framer CardInstall Quad T1 Framer CardNOTE: Quad T1 Framer (QF

Seite 71

6-58 August 2003 Access Navigator - Release 1.8Electrical InstallationInstall Quad T1 Framer Card2. Remove new QF card from antistatic wrapper and str

Seite 72

Access Navigator - Release 1.8 August 2003 6-59 Electrical InstallationVerify OperationVerify OperationNOTE: Verification requires a temporary loopba

Seite 73

6-60 August 2003 Access Navigator - Release 1.8Electrical InstallationVerify Operation5. Verify the following front panel status indications (see Figu

Seite 74

Access Navigator - Release 1.8 August 2003 6-61 Electrical InstallationReplace Front CoverReplace Front CoverDANGER! FIRE HAZARD. STANDARDS UL 1950

Seite 75

6-62 August 2003 Access Navigator - Release 1.8Electrical InstallationStart RS-232 Management SessionStart RS-232 Management SessionNOTE: Security –

Seite 76

Access Navigator - Release 1.8 August 2003 6-63 Electrical InstallationSet DateSet DateNOTE: Date format is month/day/year with slashes to separate t

Seite 77

6-64 August 2003 Access Navigator - Release 1.8Electrical InstallationSet System ID or CLLI codeSet System ID or CLLI codeNOTE: The System Identifier

Seite 78 - Standards

Access Navigator - Release 1.8 August 2003 6-65 Electrical InstallationSet Gateway AddressSet the Ethernet IP address and mask by typing the following

Seite 79

Access Navigator - Release 1.8 August 2003 1xvii Table of Contents7 Start Management SessionManagement Requirements . . . . . . . . . . . . . . . . .

Seite 80

6-66 August 2003 Access Navigator - Release 1.8Electrical InstallationExit Management Session

Seite 81

CHAPTERStart Management SessionIn this Chaptern Management Requirements ... 7-2n Command Line Interface Conventions ... 7-3n RS-232 Management ... 7-4

Seite 82

7-2 August 2003 Access Navigator - Release 1.8Start Management SessionManagement RequirementsManagement RequirementsNOTE: Password Security – No user

Seite 83

Access Navigator - Release 1.8 August 2003 7-3 Start Management SessionCommand Line Interface ConventionsCommand Line Interface ConventionsNOTE: To

Seite 84

7-4 August 2003 Access Navigator - Release 1.8Start Management SessionRS-232 ManagementRS-232 ManagementRS-232 Management RequirementsA permanent RS-2

Seite 85 - PLUG-IN CIRCUIT CARDS

Access Navigator - Release 1.8 August 2003 7-5 Start Management SessionObtain InformationObtain InformationNOTE: User names and passwords are not re

Seite 86 - Horizontal 19-Inch Rack Mount

7-6 August 2003 Access Navigator - Release 1.8Start Management SessionStart RS-232 Management SessionStart RS-232 Management Session1. Start managemen

Seite 87

Access Navigator - Release 1.8 August 2003 7-7 Start Management SessionPerform Management OperationsPerform Management OperationsAfter logging on, pe

Seite 88

7-8 August 2003 Access Navigator - Release 1.8Start Management SessionTelnet ManagementTelnet ManagementTelnet Management RequirementsTelnet requires

Seite 89 - Horizontal 23-Inch Rack Mount

Access Navigator - Release 1.8 August 2003 7-9 Start Management SessionObtain InformationObtain InformationNOTE: User names and passwords are not re

Seite 90

1xviii August 2003 Access Navigator - Release 1.8Table of ContentsTest Groom DS1 Circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Seite 91

7-10 August 2003 Access Navigator - Release 1.8Start Management SessionPerform Management Operations2. If a “Login:” message similar to the following

Seite 92

Access Navigator - Release 1.8 August 2003 7-11 Start Management SessionNetworkValet EMS and Valet ManagementNetworkValet EMS and Valet ManagementRef

Seite 93

7-12 August 2003 Access Navigator - Release 1.8Start Management SessionNetworkValet EMS and Valet Management

Seite 94 - Install Crossbars

CHAPTERProvision Access NavigatorIn this Chaptern Basic Provisioning Overview ... 8-2n Basic Provisioning Quick Guide ... 8-2n Obtain Provisioning Inf

Seite 95

8-2 August 2003 Access Navigator - Release 1.8Provision Access NavigatorBasic Provisioning OverviewBasic Provisioning OverviewThis procedure covers pr

Seite 96

Access Navigator - Release 1.8 August 2003 8-3 Provision Access NavigatorObtain Provisioning InformationObtain Provisioning InformationObtain the fol

Seite 97 - Vertical Wall Mount

8-4 August 2003 Access Navigator - Release 1.8Provision Access NavigatorVerify System Equipment ConfigurationVerify System Equipment ConfigurationCAUT

Seite 98 - Prepare Plywood

Access Navigator - Release 1.8 August 2003 8-5 Provision Access NavigatorSet System ID or CLLI CodeSet System ID or CLLI CodeNOTE: The System Identi

Seite 99

8-6 August 2003 Access Navigator - Release 1.8Provision Access NavigatorSet DateSet DateNOTE: Date format is month/day/year with slashes to separate

Seite 100 - Physical Installation

Access Navigator - Release 1.8 August 2003 8-7 Provision Access NavigatorSet Ethernet PropertiesSet Ethernet PropertiesNOTE: Ethernet is required fo

Seite 101 - Physical Installation

Access Navigator - Release 1.8 August 2003 1xix Table of ContentsProvision Drop DS1 to Remote Access Bank II . . . . . . . . . . . . . . . . . . 11-1

Seite 102

8-8 August 2003 Access Navigator - Release 1.8Provision Access NavigatorSet Ethernet Properties3. If IP address or subnet mask is not correct, enter t

Seite 103

Access Navigator - Release 1.8 August 2003 8-9 Provision Access NavigatorSet User and Password SecuritySet User and Password SecurityNOTE: Level 1 u

Seite 104

8-10 August 2003 Access Navigator - Release 1.8Provision Access NavigatorSet User and Password SecurityNOTE: Passwords are optional. Passwords can be

Seite 105 - Electrical Installation

Access Navigator - Release 1.8 August 2003 8-11 Provision Access NavigatorSet SNMP PropertiesSet SNMP PropertiesNOTE: Settings are text strings and

Seite 106

8-12 August 2003 Access Navigator - Release 1.8Provision Access NavigatorSet SNMP PropertiesExample: set snmp setcom "Public"8. Set SNMP Tra

Seite 107 - Electrical Installation

CHAPTERProvision DCS ServiceIn this Chaptern DCS Provisioning Overview ... 9-2n DCS Provisioning Quick Guide ... 9-6n Obtain Provisioning Information

Seite 108 - Tools and Materials Required

9-2 August 2003 Access Navigator - Release 1.8Provision DCS ServiceDCS Provisioning OverviewDCS Provisioning Overviewn Provisioning ISDN BRI Service .

Seite 109 - Chassis Ground Connection

Access Navigator - Release 1.8 August 2003 9-3 Provision DCS ServiceProvisioning ISDN BRI ServiceProvisioning ISDN BRI ServiceIntegrated Services Dig

Seite 110

9-4 August 2003 Access Navigator - Release 1.8Provision DCS ServiceProvisioning TR-08 Service with DCSProvisioning Conventional TR-08 Voice ServicesTh

Seite 111 - REAR PANEL TERMINALS

Access Navigator - Release 1.8 August 2003 9-5 Provision DCS ServiceProvisioning TR-08 Service with DCSProvisioning Enhanced Voice and Data ServicesD

Seite 112 - DSX-1 Cable Connections

Copyright© 2003 Carrier Access Corporation. All rights reserved.The information presented in this manual is subject to change without notice and does

Seite 113 - Prepare DSX-1 Cables

1xx August 2003 Access Navigator - Release 1.8Table of Contents14 Alarm ClearingIdentify Alarm Clearing Procedure. . . . . . . . . . . . . . . . . . .

Seite 114

9-6 August 2003 Access Navigator - Release 1.8Provision DCS ServiceDCS Provisioning Quick GuideDCS Provisioning Quick GuideCLI Commands Descriptionsst

Seite 115

Access Navigator - Release 1.8 August 2003 9-7 Provision DCS ServiceObtain Provisioning InformationObtain Provisioning Information1. Obtain office re

Seite 116

9-8 August 2003 Access Navigator - Release 1.8Provision DCS ServiceVerify Service StatusVerify Service Status1. Verify number of DS1 circuits installe

Seite 117 - Attach Ferrite Beads

Access Navigator - Release 1.8 August 2003 9-9 Provision DCS ServiceVerify Service StatusNOTE: Commands containing as ds1 <n> require the oper

Seite 118 - PREMISES

9-10 August 2003 Access Navigator - Release 1.8Provision DCS ServiceSet Unused Circuits Out of ServiceInterface Status--------- ------DS1 1 Channel 1

Seite 119

Access Navigator - Release 1.8 August 2003 9-11 Provision DCS ServiceSet System Clock SourceSet System Clock SourceNOTE: If Access Navigator provide

Seite 120

9-12 August 2003 Access Navigator - Release 1.8Provision DCS ServiceProvision “Groom” DS1 Circuits to NetworkProvision “Groom” DS1 Circuits to Network

Seite 121 - RS-232 Management Connection

Access Navigator - Release 1.8 August 2003 9-13 Provision DCS ServiceProvision “Groom” DS1 Circuits to Network5. Set groom DS1 line code to AMI or B8

Seite 122

9-14 August 2003 Access Navigator - Release 1.8Provision DCS ServiceTest Groom DS1 CircuitsTest Groom DS1 CircuitsNOTE: The Access Navigator supports

Seite 123 - Connect Shielded RS-232 Cable

Access Navigator - Release 1.8 August 2003 9-15 Provision DCS ServiceProvision “Drop” DS1 Circuits to Subscribers3. Set DS1 type to “drop” with the f

Seite 124

Access Navigator - Release 1.8 August 2003 1xxi Table of ContentsGR-303 Status and Performance . . . . . . . . . . . . . . . . . . . . . . . . . . .

Seite 125 - Preconfigure Optional Modem

9-16 August 2003 Access Navigator - Release 1.8Provision DCS ServiceProvision and Connect ISDN PRI ChannelsProvision and Connect ISDN PRI ChannelsFull

Seite 126 - Information and Materials

Access Navigator - Release 1.8 August 2003 9-17 Provision DCS ServiceProvision and Connect DS0sProvision and Connect DS0s1. Show current DS0 crosscon

Seite 127

9-18 August 2003 Access Navigator - Release 1.8Provision DCS ServiceProvision and Connect DS0sNOTE: DS0 voice channels use robbed-bit signaling, whil

Seite 128

Access Navigator - Release 1.8 August 2003 9-19 Provision DCS ServiceTurn Up ServiceTurn Up Service1. Show current DS1 status with the following comm

Seite 129

9-20 August 2003 Access Navigator - Release 1.8Provision DCS ServiceTest DS1 and DS0 Circuits

Seite 130 - Connect BITS Cable

CHAPTERProvision GR-303 ServiceIn this Chaptern GR-303 Provisioning Overview ... 10-2n GR-303 Provisioning Quick Guide ... 10-9n Verify System Equipme

Seite 131 - Alarm Output Connections

10-2 August 2003 Access Navigator - Release 1.8Provision GR-303 ServiceGR-303 Provisioning OverviewGR-303 Provisioning Overviewn Provisioning ISDN BRI

Seite 132 - Wire Alarm Output Connector

Access Navigator - Release 1.8 August 2003 10-3 Provision GR-303 ServiceGR-303 Provisioning Overview Figure 10-1 Access Navigator GR-303 ServicesRemo

Seite 133

10-4 August 2003 Access Navigator - Release 1.8Provision GR-303 ServiceProvisioning ISDN BRI ServiceProvisioning ISDN BRI ServiceIntegrated Services D

Seite 134

Access Navigator - Release 1.8 August 2003 10-5 Provision GR-303 ServiceProvisioning TR-08 Service with GR-303 TranslationProvisioning TR-08 Service

Seite 135 - Alarm Input Connections

1xxii August 2003 Access Navigator - Release 1.8Table of Contents16 Maintenance ProceduresCompliance and Safety Requirements . . . . . . . . . . . .

Seite 136 - Wire Alarm Input Connector

10-6 August 2003 Access Navigator - Release 1.8Provision GR-303 ServiceProvisioning TR-08 Service with GR-303 TranslationTR-08 ConfigurationTR-08 term

Seite 137

Access Navigator - Release 1.8 August 2003 10-7 Provision GR-303 ServiceProvisioning TR-08 Service with GR-303 TranslationFigure 10-3. DS0s Assigned

Seite 138

10-8 August 2003 Access Navigator - Release 1.8Provision GR-303 ServiceProvisioning TR-08 Service with GR-303 TranslationFraming and FDL SettingsSLC-9

Seite 139 - DC Power Connections

Access Navigator - Release 1.8 August 2003 10-9 Provision GR-303 ServiceGR-303 Provisioning Quick GuideGR-303 Provisioning Quick GuideCLI Commands De

Seite 140 - Wire Power Connectors

10-10 August 2003 Access Navigator - Release 1.8Provision GR-303 ServiceObtain Provisioning InformationObtain Provisioning Information1. Obtain office

Seite 141 - Verify Wiring

Access Navigator - Release 1.8 August 2003 10-11 Provision GR-303 ServiceVerify Service StatusDS1 Card 6 Installed 1DS1 Card 7 Card not installedDS1

Seite 142 - Dress Cables and Wires

10-12 August 2003 Access Navigator - Release 1.8Provision GR-303 ServiceVerify Service StatusNOTE: Commands containing ds1 <n> require the oper

Seite 143 - Acceptance Test

Access Navigator - Release 1.8 August 2003 10-13 Provision GR-303 ServiceSet Unused Circuits Out of ServiceNOTE: Commands containing ds0 <n:ch>

Seite 144

10-14 August 2003 Access Navigator - Release 1.8Provision GR-303 ServiceSet System Switch TypeSet System Switch TypeNOTE: Access Navigator supports L

Seite 145 - Verify DSX-1 Connections

Access Navigator - Release 1.8 August 2003 10-15 Provision GR-303 ServiceProvision “Switch” DS1s to Interface GroupProvision “Switch” DS1s to Interfa

Seite 146

Access Navigator - Release 1.8 August 2003 1xxiii Table of Contents18 CLI Language ReferenceOverview . . . . . . . . . . . . . . . . . . . . . . . .

Seite 147

10-16 August 2003 Access Navigator - Release 1.8Provision GR-303 ServiceProvision “Switch” DS1s to Interface Group5. Set switch DS1 line code to B8ZS

Seite 148 - Verify BITS Connection

Access Navigator - Release 1.8 August 2003 10-17 Provision GR-303 ServiceProvision “Switch” DS1s to Interface Group9. Set switch DS1 line buildout (l

Seite 149

10-18 August 2003 Access Navigator - Release 1.8Provision GR-303 ServiceAssign Primary and Secondary EOCAssign Primary and Secondary EOC1. Show curren

Seite 150

Access Navigator - Release 1.8 August 2003 10-19 Provision GR-303 ServiceAssign Primary and Secondary TMCAssign Primary and Secondary TMC1. Show curr

Seite 151

10-20 August 2003 Access Navigator - Release 1.8Provision GR-303 ServiceTest DS1 CircuitsTest DS1 CircuitsNOTE: The Access Navigator supports the fol

Seite 152 - Exit Management Session

Access Navigator - Release 1.8 August 2003 10-21 Provision GR-303 ServiceProvision “Drop” DS1 Circuits to SubscriberProvision “Drop” DS1 Circuits to

Seite 153 - Precautions

10-22 August 2003 Access Navigator - Release 1.8Provision GR-303 ServiceProvision “Drop” DS1 Circuits to Subscriber3. Set DS1 type to “drop” with the

Seite 154 - Verify Software Compatibility

Access Navigator - Release 1.8 August 2003 10-23 Provision GR-303 ServiceProvision “Drop” DS1 Circuits to Subscriber8. Set drop DS1 line buildout (lb

Seite 155 - Remove Front Cover

10-24 August 2003 Access Navigator - Release 1.8Provision GR-303 ServiceProvision “Drop” DS1 Circuits to SubscriberNOTE: Remote Access Bank II provis

Seite 156 - Install Controller Card

Access Navigator - Release 1.8 August 2003 10-25 Provision GR-303 ServiceProvision ISDN BRI 4:1 TDM Service to SubscribersProvision ISDN BRI 4:1 TDM

Seite 157 - Verify Operation

1xxiv August 2003 Access Navigator - Release 1.8Table of ContentsConnect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Seite 158 - Replace Front Cover

10-26 August 2003 Access Navigator - Release 1.8Provision GR-303 ServiceProvision ISDN BRI 4:1 TDM Service to Subscribers2. Show current ISDN BRI sett

Seite 159

Access Navigator - Release 1.8 August 2003 10-27 Provision GR-303 ServiceProvision ISDN BRI 4:1 TDM Service to Subscribers4. Un-assign ISDN BRI chann

Seite 160

10-28 August 2003 Access Navigator - Release 1.8Provision GR-303 ServiceProvision ISDN BRI 4:1 TDM Service to Subscribers7. Show current ISDN BRI conn

Seite 161 - Install Quad T1 Framer Card

Access Navigator - Release 1.8 August 2003 10-29 Provision GR-303 ServiceProvision ISDN BRI 4:1 TDM Service to SubscribersNOTE: To change existing I

Seite 162

10-30 August 2003 Access Navigator - Release 1.8Provision GR-303 ServiceProvision DS0s to SubscribersProvision DS0s to SubscribersNOTE: Commands incl

Seite 163

Access Navigator - Release 1.8 August 2003 10-31 Provision GR-303 ServiceProvision DS0s to Subscribersprovisioning GR-303 service. See also Provision

Seite 164

10-32 August 2003 Access Navigator - Release 1.8Provision GR-303 ServiceAssign Call Reference Values (CRVs)Assign Call Reference Values (CRVs)CAUTION!

Seite 165 - Setup Summary

Access Navigator - Release 1.8 August 2003 10-33 Provision GR-303 ServiceAssign Call Reference Values (CRVs)Figure 10-5. Factory Default Call Referen

Seite 166

10-34 August 2003 Access Navigator - Release 1.8Provision GR-303 ServiceTurn Up ServiceTurn Up Service1. Show current DS1 status with the following co

Seite 167 - Set Time

CHAPTERProvision Remote Access Bank IIIn this Chaptern Remote Access Bank II Provisioning Overview ... 11-2n Remote Access Bank II Provisioning Quick

Seite 168 - Set System ID or CLLI code

Access Navigator - Release 1.8 August 2003 1xxv Table of ContentsSend Remote SDSL Payload Loopup . . . . . . . . . . . . . . . . . . . . . . 18-84Se

Seite 169 - Set Gateway Address

11-2 August 2003 Access Navigator - Release 1.8Provision Remote Access Bank IIRemote Access Bank II Provisioning OverviewRemote Access Bank II Provisi

Seite 170

Access Navigator - Release 1.8 August 2003 11-3 Provision Remote Access Bank IIPre-Provisioning and TestingPre-Provisioning and TestingThe Access Nav

Seite 171 - Start Management Session

11-4 August 2003 Access Navigator - Release 1.8Provision Remote Access Bank IIAnalog InterfacesAnalog InterfacesThe Access Bank II family of channel b

Seite 172 - Management Requirements

Access Navigator - Release 1.8 August 2003 11-5 Provision Remote Access Bank IICrossconnect FeaturesFigure 11-3 Crossconnections (ABII)Table 11-1 Val

Seite 173 - Start Management Session

11-6 August 2003 Access Navigator - Release 1.8Provision Remote Access Bank IIFX Analog InterfacesFX Analog InterfacesNOTE: Provisioning FX service u

Seite 174 - RS-232 Management

Access Navigator - Release 1.8 August 2003 11-7 Provision Remote Access Bank IIFractional InterfacesFractional InterfacesA fractional interface is a

Seite 175 - Set Up Terminal Program

11-8 August 2003 Access Navigator - Release 1.8Provision Remote Access Bank IIRemote InterfacesRemote InterfacesThe Access Bank II family can provide

Seite 176

Access Navigator - Release 1.8 August 2003 11-9 Provision Remote Access Bank IIRemote Access Bank II Provisioning Quick GuideRemote Access Bank II Pr

Seite 177 - Perform Management Operations

11-10 August 2003 Access Navigator - Release 1.8Provision Remote Access Bank IIRemote Access Bank II Maintenance Quick GuideRemote Access Bank II Main

Seite 178 - Telnet Management

Access Navigator - Release 1.8 August 2003 11-11 Provision Remote Access Bank IIObtain Provisioning InformationObtain Provisioning Information1. Obta

Seite 179

1xxvi August 2003 Access Navigator - Release 1.8Table of ContentsSet Remote T1Drop Framing . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-

Seite 180

11-12 August 2003 Access Navigator - Release 1.8Provision Remote Access Bank IIVerify System Equipment Configuration4. Show current DS1 service status

Seite 181

Access Navigator - Release 1.8 August 2003 11-13 Provision Remote Access Bank IIVerify System Equipment Configuration5. Verify number of DS1s already

Seite 182

11-14 August 2003 Access Navigator - Release 1.8Provision Remote Access Bank IITemporarily Disable Configuration DownloadingThe status command will di

Seite 183 - Provision Access Navigator

Access Navigator - Release 1.8 August 2003 11-15 Provision Remote Access Bank IIProvision Drop DS1 to Remote Access Bank IIProvision Drop DS1 to Remo

Seite 184 - Basic Provisioning Overview

11-16 August 2003 Access Navigator - Release 1.8Provision Remote Access Bank IIProvision Drop DS1 to Remote Access Bank II6. Set DS1 remote device man

Seite 185 - Provision Access Navigator

Access Navigator - Release 1.8 August 2003 11-17 Provision Remote Access Bank IITest DS1 CircuitsTest DS1 CircuitsNOTE: The Access Navigator support

Seite 186

11-18 August 2003 Access Navigator - Release 1.8Provision Remote Access Bank IIProvision DS0sType: GR303Signaling: LOOP STARTUp/Down: DOWNSettings for

Seite 187 - Set System ID or CLLI Code

Access Navigator - Release 1.8 August 2003 11-19 Provision Remote Access Bank IIProvision DS0 CrossconnectsProvision DS0 Crossconnects1. Show current

Seite 188

11-20 August 2003 Access Navigator - Release 1.8Provision Remote Access Bank IIProvision DS0 Crossconnects4. Connect DS0s (see Figure 1) to make 2-way

Seite 189 - Set Ethernet Properties

Access Navigator - Release 1.8 August 2003 11-21 Provision Remote Access Bank IICreate Fractional Interfaces (if required)Create Fractional Interface

Seite 190

Access Navigator - Release 1.8 August 2003 1xxvii Table of ContentsShow Users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Seite 191

11-22 August 2003 Access Navigator - Release 1.8Provision Remote Access Bank IIConfigure Remote RS-232 Interface (if used)Configure Remote RS-232 Inte

Seite 192

Access Navigator - Release 1.8 August 2003 11-23 Provision Remote Access Bank IIConfigure Remote RS-232 Interface (if used)3. Set baud rate with the

Seite 193 - Set SNMP Properties

11-24 August 2003 Access Navigator - Release 1.8Provision Remote Access Bank IIConfigure Remote T1 Drop Interface (if used)Configure Remote T1 Drop In

Seite 194

Access Navigator - Release 1.8 August 2003 11-25 Provision Remote Access Bank IIConfigure Remote T1 Drop Interface (if used)3. Set remote T1 Drop fra

Seite 195 - Provision DCS Service

11-26 August 2003 Access Navigator - Release 1.8Provision Remote Access Bank IIConfigure Remote V.35 Interface (if used)Configure Remote V.35 Interfac

Seite 196 - DCS Provisioning Overview

Access Navigator - Release 1.8 August 2003 11-27 Provision Remote Access Bank IIConfigure Remote V.35 Interface (if used)3. Set remote V.35 clock rec

Seite 197 - Provisioning ISDN BRI Service

11-28 August 2003 Access Navigator - Release 1.8Provision Remote Access Bank IIConnect Fractional Interface to Remote InterfaceConnect Fractional Inte

Seite 198

Access Navigator - Release 1.8 August 2003 11-29 Provision Remote Access Bank IIVerify Downloaded Settings (optional)Verify Downloaded Settings (opti

Seite 199 - Special TR-08 Settings

11-30 August 2003 Access Navigator - Release 1.8Provision Remote Access Bank IITest Remote CircuitsTest Remote CircuitsNOTE: The Access Navigator can

Seite 200 - DCS Provisioning Quick Guide

CHAPTERProvision Remote Adit 600 via FDLIn this Chaptern Remote Adit 600 FDL Provisioning Overview ... 12-2n Remote Adit 600 FDL Provisioning Quick Gu

Seite 201 - Provision DCS Service

1xxviii August 2003 Access Navigator - Release 1.8Table of ContentsB FDL InterfaceOverview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Seite 202 - Verify Service Status

12-2 August 2003 Access Navigator - Release 1.8Provision Remote Adit 600 via FDLRemote Adit 600 FDL Provisioning OverviewRemote Adit 600 FDL Provision

Seite 203

Access Navigator - Release 1.8 August 2003 12-3 Provision Remote Adit 600 via FDLFDL Management ConfigurationAfter configuring the FDL management con

Seite 204

12-4 August 2003 Access Navigator - Release 1.8Provision Remote Adit 600 via FDLRemote Adit 600 FDL Provisioning Quick GuideRemote Adit 600 FDL Provis

Seite 205 - Set System Clock Source

Access Navigator - Release 1.8 August 2003 12-5 Provision Remote Adit 600 via FDLRemote Adit 600 FDL Provisioning Quick Guideset ds0 <n:ch> up

Seite 206

12-6 August 2003 Access Navigator - Release 1.8Provision Remote Adit 600 via FDLObtain Provisioning InformationObtain Provisioning Information1. Obtai

Seite 207

Access Navigator - Release 1.8 August 2003 12-7 Provision Remote Adit 600 via FDLVerify Equipment Configuration4. Show current DS1 service status wit

Seite 208 - Test Groom DS1 Circuits

12-8 August 2003 Access Navigator - Release 1.8Provision Remote Adit 600 via FDLVerify Equipment ConfigurationNOTE: Commands containing ds1 <n>

Seite 209

Access Navigator - Release 1.8 August 2003 12-9 Provision Remote Adit 600 via FDLVerify Equipment ConfigurationNOTE: Commands containing ds0 <n:c

Seite 210

12-10 August 2003 Access Navigator - Release 1.8Provision Remote Adit 600 via FDLProvision Drop DS1s to Remote Adit 600Provision Drop DS1s to Remote A

Seite 211 - Provision and Connect DS0s

Access Navigator - Release 1.8 August 2003 12-11 Provision Remote Adit 600 via FDLProvision Drop DS1s to Remote Adit 6004. Set DS1 type to “drop”set

Seite 212

CHAPTERIntroductionIn this Chaptern Overview ... 1-2n Features and Benefits ... 1-3n Access Navigator Configurations ... 1-3n System Architecture ...

Seite 213 - Test DS1 and DS0 Circuits

12-12 August 2003 Access Navigator - Release 1.8Provision Remote Adit 600 via FDLProvision Drop DS1s to Remote Adit 60012. Set drop DS1 loop request c

Seite 214

Access Navigator - Release 1.8 August 2003 12-13 Provision Remote Adit 600 via FDLProvision Drop DS0sProvision Drop DS0sNOTE: Commands such as ds0 &

Seite 215 - Provision GR-303 Service

12-14 August 2003 Access Navigator - Release 1.8Provision Remote Adit 600 via FDLProvision Drop DS0s3. Set DS0 typeset ds0 <n:ch> type <voice

Seite 216 - GR-303 Provisioning Overview

Access Navigator - Release 1.8 August 2003 12-15 Provision Remote Adit 600 via FDLProvision DS0 Crossconnects (if required)Provision DS0 Crossconnect

Seite 217 - Provision GR-303 Service

12-16 August 2003 Access Navigator - Release 1.8Provision Remote Adit 600 via FDLProvision DS0 Crossconnects (if required)NOTE: To change existing DS

Seite 218 - Provisioning P-Phone Service

Access Navigator - Release 1.8 August 2003 12-17 Provision Remote Adit 600 via FDLProvision Remote Adit 600Provision Remote Adit 6001. Start remote m

Seite 219

12-18 August 2003 Access Navigator - Release 1.8Provision Remote Adit 600 via FDLTest DS1 and DS0 Circuits

Seite 220 - CRV Numbering

CHAPTERProvision Remote Adit 600 via IP DS0In this Chaptern Remote IP DS0 Provisioning Overview ... 13-2n Remote IP DS0 Provisioning Quick Guide ... 1

Seite 221

13-2 August 2003 Access Navigator - Release 1.8Provision Remote Adit 600 via IP DS0Remote IP DS0 Provisioning OverviewRemote IP DS0 Provisioning Overv

Seite 222 - Framing and FDL Settings

Access Navigator - Release 1.8 August 2003 13-3 Provision Remote Adit 600 via IP DS0IP DS0 Management ConfigurationIP DS0 Management ConfigurationIP

Seite 223

PREFACEPrefaceIn this Prefacen Compliance ... ivn Notices ... ivn Electrostatic Discharge (ESD) Precautions ... vn Carrier Access Software License Agr

Seite 224

1-2 August 2003 Access Navigator - Release 1.8IntroductionOverviewOverviewThe Access Navigator® Multiservice Digital Access (MDA) system combines the

Seite 225

13-4 August 2003 Access Navigator - Release 1.8Provision Remote Adit 600 via IP DS0Remote IP DS0 Provisioning Quick GuideRemote IP DS0 Provisioning Qu

Seite 226

Access Navigator - Release 1.8 August 2003 13-5 Provision Remote Adit 600 via IP DS0Router Provisioning Quick GuideRouter Provisioning Quick GuideNOT

Seite 227

13-6 August 2003 Access Navigator - Release 1.8Provision Remote Adit 600 via IP DS0Router Provisioning Quick GuideConfigure Trunk Connections:1. Selec

Seite 228 - Set System Switch Type

Access Navigator - Release 1.8 August 2003 13-7 Provision Remote Adit 600 via IP DS0Remote Adit IP DS0 Provisioning Quick GuideRemote Adit IP DS0 Pro

Seite 229

13-8 August 2003 Access Navigator - Release 1.8Provision Remote Adit 600 via IP DS0Obtain Provisioning InformationObtain Provisioning Information1. Ob

Seite 230

Access Navigator - Release 1.8 August 2003 13-9 Provision Remote Adit 600 via IP DS0Verify Equipment ConfigurationA message similar to the following

Seite 231

13-10 August 2003 Access Navigator - Release 1.8Provision Remote Adit 600 via IP DS0Verify Equipment ConfigurationNOTE: Commands containing ds1 <n

Seite 232

Access Navigator - Release 1.8 August 2003 13-11 Provision Remote Adit 600 via IP DS0Verify Equipment ConfigurationNOTE: Commands containing ds0 <

Seite 233

13-12 August 2003 Access Navigator - Release 1.8Provision Remote Adit 600 via IP DS0Provision Groom DS1s to Adit RouterProvision Groom DS1s to Adit Ro

Seite 234 - Test DS1 Circuits

Access Navigator - Release 1.8 August 2003 13-13 Provision Remote Adit 600 via IP DS0Provision Groom DS1s to Adit Router3. Set DS1 out of service wit

Seite 235

Access Navigator - Release 1.8 August 2003 1-3 IntroductionFeatures and BenefitsFeatures and BenefitsThe Access Navigator provides the ability to con

Seite 236

13-14 August 2003 Access Navigator - Release 1.8Provision Remote Adit 600 via IP DS0Provision Groom DS1s to Adit RouterNOTE: When loop code detection

Seite 237

Access Navigator - Release 1.8 August 2003 13-15 Provision Remote Adit 600 via IP DS0Provision Drop DS1s to Remote AditProvision Drop DS1s to Remote

Seite 238

13-16 August 2003 Access Navigator - Release 1.8Provision Remote Adit 600 via IP DS0Provision Drop DS1s to Remote Adit3. Set DS1 out of service with t

Seite 239

Access Navigator - Release 1.8 August 2003 13-17 Provision Remote Adit 600 via IP DS0Provision Drop DS1s to Remote Adit10. Set drop DS1 line buildout

Seite 240

13-18 August 2003 Access Navigator - Release 1.8Provision Remote Adit 600 via IP DS0Provision Groom DS0s to Adit RouterProvision Groom DS0s to Adit Ro

Seite 241

Access Navigator - Release 1.8 August 2003 13-19 Provision Remote Adit 600 via IP DS0Provision Drop DS0s to Remote AditProvision Drop DS0s to Remote

Seite 242

13-20 August 2003 Access Navigator - Release 1.8Provision Remote Adit 600 via IP DS0Provision Drop DS0s to Remote AditNOTE: In the above message, the

Seite 243

Access Navigator - Release 1.8 August 2003 13-21 Provision Remote Adit 600 via IP DS0Provision DS0 CrossconnectsProvision DS0 CrossconnectsNOTE: Sta

Seite 244 - Provision DS0s to Subscribers

13-22 August 2003 Access Navigator - Release 1.8Provision Remote Adit 600 via IP DS0Provision DS0 CrossconnectsNOTE: To change existing DS0 connectio

Seite 245

Access Navigator - Release 1.8 August 2003 13-23 Provision Remote Adit 600 via IP DS0Provision Remote Adit 600Provision Remote Adit 600NOTE: Remote

Seite 246

1-4 August 2003 Access Navigator - Release 1.8IntroductionSystem ArchitectureSystem ArchitectureThe Access Navigator is a distributed system in which

Seite 247

13-24 August 2003 Access Navigator - Release 1.8Provision Remote Adit 600 via IP DS0Test DS1 and DS0 Circuits

Seite 248 - Test Circuits

CHAPTERAlarm ClearingIn this Chaptern Identify Alarm Clearing Procedure ... 14-2n Clear Alarms – FDL ... 14-3n Clear Alarms – EOC ... 14-8n Clear Alar

Seite 249 - In this Chapter

14-2 August 2003 Access Navigator - Release 1.8Alarm ClearingIdentify Alarm Clearing ProcedureIdentify Alarm Clearing ProcedureFind alarm source in fo

Seite 250

Access Navigator - Release 1.8 August 2003 14-3 Alarm ClearingClear Alarms – FDLClear Alarms – FDLNOTE: The CLI has three alarm levels:CRITICAL alar

Seite 251 - Requirements

14-4 August 2003 Access Navigator - Release 1.8Alarm ClearingClear Alarms – FDLTable 14-2 CLI Major Alarm Message and Trouble Clearing ProcedureEvent

Seite 252 - Crossconnect Features

Access Navigator - Release 1.8 August 2003 14-5 Alarm ClearingClear Alarms – FDLTable 14-3 CLI Minor Alarm Message and Trouble Clearing ProcedureEven

Seite 253

14-6 August 2003 Access Navigator - Release 1.8Alarm ClearingClear Alarms – FDLEOC Primary/Secondary Link DownEOC LAPD data link communication not est

Seite 254 - FX Analog Interfaces

Access Navigator - Release 1.8 August 2003 14-7 Alarm ClearingClear Alarms – FDLTMC Primary/Secondary Link DownTMC LAPD data link communication not e

Seite 255 - Fractional Interfaces

14-8 August 2003 Access Navigator - Release 1.8Alarm ClearingClear Alarms – EOCClear Alarms – EOCNOTE: EOC Interface – This procedure describes Acces

Seite 256 - Remote Interfaces

Access Navigator - Release 1.8 August 2003 14-9 Alarm ClearingClear Alarms – EOCTable 14-5. EOC Major Alarm Message and Trouble Clearing ProcedureEve

Seite 257

Access Navigator - Release 1.8 August 2003 1-5 IntroductionCarrier Access Support ProductsCarrier Access Support ProductsAccess BanksAccess Bank® fam

Seite 258

14-10 August 2003 Access Navigator - Release 1.8Alarm ClearingClear Alarms – EOCSystem Alarm State ChangeEvent Report Service Problem (5ESS only).The

Seite 259

Access Navigator - Release 1.8 August 2003 14-11 Alarm ClearingClear Alarms – EOCController A/B IncompatibleEvent Report Replaceable Unit Mismatch. C

Seite 260

14-12 August 2003 Access Navigator - Release 1.8Alarm ClearingClear Alarms – EOCRemote Device #n: T1 #x rx Yellow alarmRemote device on DS1 #n receive

Seite 261

Access Navigator - Release 1.8 August 2003 14-13 Alarm ClearingClear Alarms – EOCTable 14-7 EOC Warning Alarm Message and Trouble Clearing ProcedureE

Seite 262

14-14 August 2003 Access Navigator - Release 1.8Alarm ClearingClear Alarms – SNMPClear Alarms – SNMPNOTE: This procedure describes Access Navigator t

Seite 263

Access Navigator - Release 1.8 August 2003 14-15 Alarm ClearingClear Alarms – Status IndicatorsClear Alarms – Status IndicatorsFind indicator in foll

Seite 264

14-16 August 2003 Access Navigator - Release 1.8Alarm ClearingPower Status LEDsPower Status LEDsThe Access Navigator may have one or two Controller ca

Seite 265 - Provision DS0s

Access Navigator - Release 1.8 August 2003 14-17 Alarm ClearingActive/Standby Controller Status LEDsActive/Standby Controller Status LEDsThe Access N

Seite 266

14-18 August 2003 Access Navigator - Release 1.8Alarm ClearingCritical Alarm Status LEDsCritical Alarm Status LEDsA critical alarm means that a fault

Seite 267 - Provision DS0 Crossconnects

Access Navigator - Release 1.8 August 2003 14-19 Alarm ClearingMinor Alarm Status LEDsMinor Alarm Status LEDsA minor alarm means that a non-service a

Seite 268

1-6 August 2003 Access Navigator - Release 1.8IntroductionManagementManagementThe Access Navigator includes RS-232 and Ethernet ports for local and re

Seite 269

14-20 August 2003 Access Navigator - Release 1.8Alarm ClearingDS1 Status LEDsDS1 Status LEDsEach Quad T1 Framer (QF) card has status indicators for fo

Seite 270

Access Navigator - Release 1.8 August 2003 14-21 Alarm ClearingEthernet Link Status LEDEthernet Link Status LEDNOTE: An Ethernet connection is requi

Seite 271

14-22 August 2003 Access Navigator - Release 1.8Alarm ClearingEthernet Link Status LED

Seite 272

CHAPTERDiagnostics & TroubleshootingIn this Chaptern Alarms and Logs ... 15-2n Alarm and Status Indicators ... 15-8n Status and Performance ... 15

Seite 273

15-2 August 2003 Access Navigator - Release 1.8Diagnostics & TroubleshootingAlarms and LogsAlarms and Logsn Operations Interface ... 15-2n Alarms

Seite 274

Access Navigator - Release 1.8 August 2003 15-3 Diagnostics & TroubleshootingAlarm Reportingl MINOR alarms affect service to 2 to 23 subscribers,

Seite 275

15-4 August 2003 Access Navigator - Release 1.8Diagnostics & TroubleshootingFacility Alarm Systeml Alarm Cutoff (ACO)l DS1 statusl Ethernet status

Seite 276

Access Navigator - Release 1.8 August 2003 15-5 Diagnostics & TroubleshootingDS1 FailuresFigure 15-1. Access Navigator Alarm Signal ResponseAcces

Seite 277

15-6 August 2003 Access Navigator - Release 1.8Diagnostics & TroubleshootingConfiguration Change LogSyntax: log ds1 <n>Displays only DS1 ala

Seite 278 - Test Remote Circuits

Access Navigator - Release 1.8 August 2003 15-7 Diagnostics & TroubleshootingBERT LogBERT LogUsing CLI commands, the Access Navigator can perform

Seite 279

Access Navigator - Release 1.8 August 2003 1-7 IntroductionSNMPSNMPThe Access Navigator SNMP Agent is based on the SNMPv1 standard. It implements the

Seite 280 - ADIT 6 00

15-8 August 2003 Access Navigator - Release 1.8Diagnostics & TroubleshootingAlarm and Status IndicatorsAlarm and Status Indicatorsn Indicator Loca

Seite 281 - FDL Management Configuration

Access Navigator - Release 1.8 August 2003 15-9 Diagnostics & TroubleshootingIndicator LocationsFigure 15-3. Rear Panel Ethernet IndicatorEtherne

Seite 282

15-10 August 2003 Access Navigator - Release 1.8Diagnostics & TroubleshootingIndicator DescriptionsIndicator DescriptionsEach Controller card prov

Seite 283 - CLI Commands Descriptions

Access Navigator - Release 1.8 August 2003 15-11 Diagnostics & TroubleshootingStatus and PerformanceStatus and Performancen Status Clock ... 15-1

Seite 284

15-12 August 2003 Access Navigator - Release 1.8Diagnostics & TroubleshootingStatus DS0Status DS0 Displays the status for each DS0 specified (up t

Seite 285

Access Navigator - Release 1.8 August 2003 15-13 Diagnostics & TroubleshootingStatus DS1Status DS1Displays a detailed DS1 service status message.

Seite 286

15-14 August 2003 Access Navigator - Release 1.8Diagnostics & TroubleshootingStatus DS1 AllDescription:Status DS1 AllDisplays an abbreviated list

Seite 287

Access Navigator - Release 1.8 August 2003 15-15 Diagnostics & TroubleshootingStatus DS1 AllMessage:

Seite 288

15-16 August 2003 Access Navigator - Release 1.8Diagnostics & TroubleshootingStatus DS1 PerformanceStatus DS1 PerformanceDisplays current performa

Seite 289

Access Navigator - Release 1.8 August 2003 15-17 Diagnostics & TroubleshootingStatus DS1 Performance History line errored seconds:

Seite 290

1-8 August 2003 Access Navigator - Release 1.8IntroductionValet and NetworkValet EMS SoftwareValet and NetworkValet EMS SoftwareValet™ and NetworkVale

Seite 291 - Provision Drop DS0s

15-18 August 2003 Access Navigator - Release 1.8Diagnostics & TroubleshootingClear DS1 PerformanceMessage: Performance Statistics for DS1 #9

Seite 292

Access Navigator - Release 1.8 August 2003 15-19 Diagnostics & TroubleshootingStatus EquipmentStatus Equipment Display the status of all cards in

Seite 293

15-20 August 2003 Access Navigator - Release 1.8Diagnostics & TroubleshootingStatus IPStatus IP The Ethernet port on the Access Navigator provides

Seite 294

Access Navigator - Release 1.8 August 2003 15-21 Diagnostics & TroubleshootingStatus RemoteStatus RemoteDisplays a message listing the remote ter

Seite 295 - Provision Remote Adit 600

15-22 August 2003 Access Navigator - Release 1.8Diagnostics & TroubleshootingGR-303 Status and PerformanceGR-303 Status and Performancen Status CR

Seite 296

Access Navigator - Release 1.8 August 2003 15-23 Diagnostics & TroubleshootingStatus ISDN CRVDescription:Status ISDN CRV Displays a message listi

Seite 297

15-24 August 2003 Access Navigator - Release 1.8Diagnostics & TroubleshootingStatus ISDN CRVMessage: CRV Chan Status Call Statu

Seite 298 - CACTUS.lite

Access Navigator - Release 1.8 August 2003 15-25 Diagnostics & TroubleshootingStatus EOCStatus EOCDisplays detailed EOC service status message.Sy

Seite 299 - Navigator

15-26 August 2003 Access Navigator - Release 1.8Diagnostics & TroubleshootingStatus TMC Originating Calls: 102 Blocked Calls: 0 Secondar

Seite 300

Access Navigator - Release 1.8 August 2003 15-27 Diagnostics & TroubleshootingStatus TMC HistoryStatus TMC HistoryDisplays TMC call for the last

Seite 301

CHAPTERAccess Navigator / DCS Service ManagerIn this Chaptern Overview ... 2-2n System Architecture ... 2-3n Features and Benefits ... 2-4n Configurat

Seite 302

15-28 August 2003 Access Navigator - Release 1.8Diagnostics & TroubleshootingClear Blocked Call CountClear Blocked Call CountSets the blocked call

Seite 303

Access Navigator - Release 1.8 August 2003 15-29 Diagnostics & TroubleshootingNear-End LoopbacksNear-End LoopbacksNOTE: The DS1 must be set Out

Seite 304

15-30 August 2003 Access Navigator - Release 1.8Diagnostics & TroubleshootingDS1 Line LoopbackDS1 Line LoopbackProvides a line loopback to verify

Seite 305

Access Navigator - Release 1.8 August 2003 15-31 Diagnostics & TroubleshootingFar-End LoopbacksFar-End LoopbacksNOTE: The DS1 must be set Out of

Seite 306

15-32 August 2003 Access Navigator - Release 1.8Diagnostics & TroubleshootingDS1 Line LoopupDS1 Line LoopupSends an out-of-band (FDL) payload loop

Seite 307

Access Navigator - Release 1.8 August 2003 15-33 Diagnostics & TroubleshootingDS1 Network LoopupDS1 Network LoopupSends an out-of-band (FDL) loop

Seite 308

15-34 August 2003 Access Navigator - Release 1.8Diagnostics & TroubleshootingDS1 NIU LoopupDS1 NIU LoopupSends an in-band (bit pattern) line loopu

Seite 309

Access Navigator - Release 1.8 August 2003 15-35 Diagnostics & TroubleshootingDS1 Payload LoopupDS1 Payload LoopupSends an out-of-band (FDL) payl

Seite 310

15-36 August 2003 Access Navigator - Release 1.8Diagnostics & TroubleshootingAccess Bank II LoopbacksAccess Bank II LoopbacksNOTE: All read remot

Seite 311

Access Navigator - Release 1.8 August 2003 15-37 Diagnostics & TroubleshootingSend Remote RS232 Line LoopupSend Remote RS232 Line LoopupThis comm

Seite 312

2-2 August 2003 Access Navigator - Release 1.8Access Navigator / DCS Service ManagerOverviewOverviewThe Access Navigator® / DCS Service Manager is a c

Seite 313

15-38 August 2003 Access Navigator - Release 1.8Diagnostics & TroubleshootingSend Remote RS232 TSI Network LoopupSend Remote RS232 TSI Network Loo

Seite 314

Access Navigator - Release 1.8 August 2003 15-39 Diagnostics & TroubleshootingSend Remote T1 Payload LoopupSend Remote T1 Payload LoopupThis comm

Seite 315

15-40 August 2003 Access Navigator - Release 1.8Diagnostics & TroubleshootingSend Remote T1 Drop Line LoopupSend Remote T1 Drop Line LoopupThis co

Seite 316

Access Navigator - Release 1.8 August 2003 15-41 Diagnostics & TroubleshootingSend Remote T1 Drop Payload LoopupSend Remote T1 Drop Payload Loopu

Seite 317

15-42 August 2003 Access Navigator - Release 1.8Diagnostics & TroubleshootingSend Remote V35 TSI Equipment LoopupSend Remote V35 TSI Equipment Loo

Seite 318

Access Navigator - Release 1.8 August 2003 15-43 Diagnostics & TroubleshootingBit Patterns and Error TestsBit Patterns and Error TestsNOTE: The

Seite 319

15-44 August 2003 Access Navigator - Release 1.8Diagnostics & TroubleshootingSend DS1 Payload PatternNOTE: The p2e patterns are intended only for

Seite 320

Access Navigator - Release 1.8 August 2003 15-45 Diagnostics & TroubleshootingSend DS1 Payload PatternAn external Bit Error Rate Tester (BERT) ca

Seite 321 - Alarm Clearing

15-46 August 2003 Access Navigator - Release 1.8Diagnostics & TroubleshootingSend DS1 Line Pattern with BER TestSend DS1 Line Pattern with BER Tes

Seite 322

Access Navigator - Release 1.8 August 2003 15-47 Diagnostics & TroubleshootingSend DS1 Line Pattern with BER TestFigure 15-25. Send DS1 Line Patt

Seite 323 - Clear Alarms – FDL

Access Navigator - Release 1.8 August 2003 2-3 Access Navigator / DCS Service ManagerSystem ArchitectureSystem Architecture Figure 2-2. Access Naviga

Seite 324

15-48 August 2003 Access Navigator - Release 1.8Diagnostics & TroubleshootingSend DS1 Line Pattern with BER Test 08:15:49 FBE:0 BE:0

Seite 325 - Alarm Clearing

Access Navigator - Release 1.8 August 2003 15-49 Diagnostics & TroubleshootingSend DS1 Payload Pattern with BER TestSend DS1 Payload Pattern with

Seite 326

15-50 August 2003 Access Navigator - Release 1.8Diagnostics & TroubleshootingSend DS1 Payload Pattern with BER TestSyntax: send ds1 <n> payl

Seite 327

Access Navigator - Release 1.8 August 2003 15-51 Diagnostics & TroubleshootingSend DS1 Payload Pattern with BER Test 08:15:56 FBE:0 BE:

Seite 328 - Clear Alarms – EOC

15-52 August 2003 Access Navigator - Release 1.8Diagnostics & TroubleshootingSend DS1 Payload Pattern with BER TestDescription:Item DescriptionTim

Seite 329

Access Navigator - Release 1.8 August 2003 15-53 Diagnostics & TroubleshootingOther Maintenance CommandsOther Maintenance CommandsCLI Commands De

Seite 330

15-54 August 2003 Access Navigator - Release 1.8Diagnostics & TroubleshootingOther Maintenance Commandsload tftp config <ipaddr> <"f

Seite 331

Access Navigator - Release 1.8 August 2003 15-55 Diagnostics & TroubleshootingTechnical SupportTechnical SupportCarrier Access Customer Support i

Seite 332

15-56 August 2003 Access Navigator - Release 1.8Diagnostics & TroubleshootingTechnical SupportIf your having dial tone problems, enter the followi

Seite 333

CHAPTERMaintenance ProceduresIn this Chaptern Compliance and Safety Requirements ... 16-2n Repair and Return Procedure ... 16-2n Replace Controller Ca

Seite 334 - Clear Alarms – SNMP

1iv August 2003 Access Navigator - Release 1.8PrefaceComplianceUSAl UL 1950, 3rd Editionl FCC Part 15, Class Al FCC Part 68l NEBS Level 3 for Type 2 a

Seite 335 - Alarm Indicators

2-4 August 2003 Access Navigator - Release 1.8Access Navigator / DCS Service ManagerFeatures and BenefitsFeatures and BenefitsFunctionsThe Access Navi

Seite 336 - Power Status LEDs

16-2 August 2003 Access Navigator - Release 1.8Maintenance ProceduresCompliance and Safety RequirementsCompliance and Safety RequirementsDANGER! FIR

Seite 337

Access Navigator - Release 1.8 August 2003 16-3 Maintenance ProceduresReplace Controller CardReplace Controller CardProcedure Summaryn Overview ... 16

Seite 338 - Major Alarm Status LEDs

16-4 August 2003 Access Navigator - Release 1.8Maintenance ProceduresPrecautionsPrecautionsWARNING! THE ACCESS NAVIGATOR CONTAINS CIRCUIT CARDS AND

Seite 339 - Alarm Cutoff (ACO) Status LED

Access Navigator - Release 1.8 August 2003 16-5 Maintenance ProceduresVerify Equipment StatusVerify Equipment Status1. Start management session, if no

Seite 340 - DS1 Status LEDs

16-6 August 2003 Access Navigator - Release 1.8Maintenance ProceduresReplace Protected Controller CardReplace Protected Controller CardProcedure Summa

Seite 341 - Ethernet Link Status LED

Access Navigator - Release 1.8 August 2003 16-7 Maintenance ProceduresReplace Protected Controller CardVerify Compatibility1. Display current Controll

Seite 342

16-8 August 2003 Access Navigator - Release 1.8Maintenance ProceduresReplace Protected Controller CardRemove Front CoverWARNING! THE ACCESS NAVIGATO

Seite 343

Access Navigator - Release 1.8 August 2003 16-9 Maintenance ProceduresReplace Protected Controller Card Replace Standby ControllerCAUTION! DO NOT RE

Seite 344 - Alarms and Logs

16-10 August 2003 Access Navigator - Release 1.8Maintenance ProceduresReplace Protected Controller CardFigure 16-4. Installing and Removing Controller

Seite 345 - Alarm and Status Indicators

Access Navigator - Release 1.8 August 2003 16-11 Maintenance ProceduresReplace Protected Controller CardVerify Operation and Compatibility1. Verify po

Seite 346 - Alarm Cutoff (ACO)

Access Navigator - Release 1.8 August 2003 2-5 Access Navigator / DCS Service ManagerManagementFigure 2-3. Access Navigator Management ArchitectureT1

Seite 347 - Event Log

16-12 August 2003 Access Navigator - Release 1.8Maintenance ProceduresReplace Protected Controller CardReplace Other Controller Card1. To replace othe

Seite 348 - Configuration Change Log

Access Navigator - Release 1.8 August 2003 16-13 Maintenance ProceduresReplace Unprotected Controller CardReplace Unprotected Controller CardProcedure

Seite 349 - Syntax: log tmc permanent

16-14 August 2003 Access Navigator - Release 1.8Maintenance ProceduresReplace Unprotected Controller CardVerify Compatibility1. Display current Contro

Seite 350

Access Navigator - Release 1.8 August 2003 16-15 Maintenance ProceduresReplace Unprotected Controller CardRemove Front CoverWARNING! THE ACCESS NAVI

Seite 351 - Status Indicator

16-16 August 2003 Access Navigator - Release 1.8Maintenance ProceduresReplace Unprotected Controller Card Insert New Controller1. Locate empty Control

Seite 352 - Indicator Descriptions

Access Navigator - Release 1.8 August 2003 16-17 Maintenance ProceduresReplace Unprotected Controller CardVerify Operation and Compatibility1. Wait tw

Seite 353 - Description:

16-18 August 2003 Access Navigator - Release 1.8Maintenance ProceduresReplace Unprotected Controller Card.Figure 16-8. Location of Front Panel Control

Seite 354 - Example: status ds0 32:1-4

Access Navigator - Release 1.8 August 2003 16-19 Maintenance ProceduresReplace Quad T1 Framer CardReplace Quad T1 Framer CardProcedure Summaryn Overvi

Seite 355 - Example: status ds1 1-4

16-20 August 2003 Access Navigator - Release 1.8Maintenance ProceduresReplace Quad T1 Framer CardPrecautionsWARNING! THE ACCESS NAVIGATOR CONTAINS C

Seite 356 - Syntax: status ds1 all

Access Navigator - Release 1.8 August 2003 16-21 Maintenance ProceduresReplace Quad T1 Framer CardVerify Equipment Status1. Start management session,

Seite 357

2-6 August 2003 Access Navigator - Release 1.8Access Navigator / DCS Service ManagerConfigurationConfigurationl Hardware configuration: Modular constr

Seite 358

16-22 August 2003 Access Navigator - Release 1.8Maintenance ProceduresReplace Quad T1 Framer CardRemove Front CoverDANGER! BURN HAZARD. CHASSIS, COV

Seite 359

Access Navigator - Release 1.8 August 2003 16-23 Maintenance ProceduresReplace Quad T1 Framer CardReplace Quad T1 CardCAUTION! REMOVING A QUAD T1 FR

Seite 360

16-24 August 2003 Access Navigator - Release 1.8Maintenance ProceduresReplace Quad T1 Framer CardFigure 16-11. Installing Quad T1 Framer Card2. Straig

Seite 361 - Syntax: status equipment

Access Navigator - Release 1.8 August 2003 16-25 Maintenance ProceduresReplace Quad T1 Framer CardVerify Operation1. Display equipment status of Quad

Seite 362 - Syntax: status ip

16-26 August 2003 Access Navigator - Release 1.8Maintenance ProceduresReplace Quad T1 Framer CardNOTE: DS1 status indicators will not light if DS1 is

Seite 363 - Status Remote

Access Navigator - Release 1.8 August 2003 16-27 Maintenance ProceduresReplace Quad T1 Framer CardRestore Clock Sources (if required)1. If primary clo

Seite 364 - Example: status crv 5-8

16-28 August 2003 Access Navigator - Release 1.8Maintenance ProceduresInstall SIMM on Controller CardInstall SIMM on Controller CardProcedure Summaryn

Seite 365 - Example: status isdn crv 1-4

Access Navigator - Release 1.8 August 2003 16-29 Maintenance ProceduresInstall SIMM on Controller CardPrecautionsCAUTION! SERVICE DISRUPTIONS WILL O

Seite 366

16-30 August 2003 Access Navigator - Release 1.8Maintenance ProceduresInstall SIMM on Controller CardVerify Equipment Status1. Start management sessio

Seite 367 - Syntax: status tmc

Access Navigator - Release 1.8 August 2003 16-31 Maintenance ProceduresInstall SIMM on Controller CardCAUTION! SERVICE DISRUPTIONS WILL OCCUR IF THE

Seite 368

Access Navigator - Release 1.8 August 2003 2-7 Access Navigator / DCS Service ManagerApplicationsApplicationsl T1 Service POP-In-A-Box: Customer-loca

Seite 369 - Example: status tmc 8-12

16-32 August 2003 Access Navigator - Release 1.8Maintenance ProceduresInstall SIMM on Controller CardRemove Front CoverWARNING! THE ACCESS NAVIGATOR

Seite 370 - Syntax: clear peak call count

Access Navigator - Release 1.8 August 2003 16-33 Maintenance ProceduresInstall SIMM on Controller CardInstall SIMMCAUTION! DO NOT REMOVE THE ACTIVE

Seite 371 - Near-End Loopbacks

16-34 August 2003 Access Navigator - Release 1.8Maintenance ProceduresInstall SIMM on Controller CardFigure 16-16. Installing Controller Card SIMMNOTE

Seite 372 - DS1 Payload Loopback

Access Navigator - Release 1.8 August 2003 16-35 Maintenance ProceduresInstall SIMM on Controller Cardswitch controller13. Verify active status of upg

Seite 373 - DS1 CSU Loopup

16-36 August 2003 Access Navigator - Release 1.8Maintenance ProceduresInstall SIMM on Controller Card

Seite 374 - DS1 Line Loopup

CHAPTERUpdate Controller Card SoftwareIn this Chaptern Overview ... 17-2n Update Software via TFTP (Two Controllers) ... 17-3n Update Software via Xmo

Seite 375 - DS1 Network Loopup

17-2 August 2003 Access Navigator - Release 1.8Update Controller Card SoftwareOverviewOverviewThis procedure provides steps for updating the operating

Seite 376 - DS1 NIU Loopup

Access Navigator - Release 1.8 August 2003 17-3 Update Controller Card SoftwareUpdate Software via TFTP (Two Controllers)Update Software via TFTP (Tw

Seite 377 - DS1 Payload Loopup

17-4 August 2003 Access Navigator - Release 1.8Update Controller Card SoftwarePrecautionsPrecautionsCAUTION! THIS PROCEDURE APPLIES ONLY TO ACCESS N

Seite 378 - Access Bank II Loopbacks

Access Navigator - Release 1.8 August 2003 17-5 Update Controller Card SoftwareInformation and Materials RequiredInformation and Materials RequiredOb

Seite 379 - Send Remote RS232 Line Loopup

2-8 August 2003 Access Navigator - Release 1.8Access Navigator / DCS Service ManagerSystem Clockingl ANSI T1.403, Section 6 & 7 (jitter, pulse mas

Seite 380

17-6 August 2003 Access Navigator - Release 1.8Update Controller Card SoftwareVerify Equipment StatusVerify Equipment Status1. If you are not currentl

Seite 381 - Send Remote T1 TSI Loopup

Access Navigator - Release 1.8 August 2003 17-7 Update Controller Card SoftwareVerify IP ConnectivityVerify IP ConnectivityVerify IP connectivity bet

Seite 382

17-8 August 2003 Access Navigator - Release 1.8Update Controller Card SoftwareDownload SoftwareDownload SoftwareNOTE: In the following step, you must

Seite 383 - Send Remote V35 Line Loopup

Access Navigator - Release 1.8 August 2003 17-9 Update Controller Card SoftwareDownload SoftwareCAUTION! THE FOLLOWING STEPS ARE REQUIRED TO ENSURE

Seite 384

17-10 August 2003 Access Navigator - Release 1.8Update Controller Card SoftwareDownload ConfigurationDownload ConfigurationThis step is optional and w

Seite 385 - Bit Patterns and Error Tests

Access Navigator - Release 1.8 August 2003 17-11 Update Controller Card SoftwareUpdate Software via Xmodem (Two Controllers)Update Software via Xmode

Seite 386 - Send DS1 Payload Pattern

17-12 August 2003 Access Navigator - Release 1.8Update Controller Card SoftwarePrecautionsPrecautionsCAUTION! THIS PROCEDURE APPLIES ONLY TO ACCESS

Seite 387

Access Navigator - Release 1.8 August 2003 17-13 Update Controller Card SoftwareInformation and Materials RequiredInformation and Materials RequiredO

Seite 388

17-14 August 2003 Access Navigator - Release 1.8Update Controller Card SoftwareDownload SoftwareCAUTION! DO NOT CONTINUE THIS PROCEDURE IF ONE CONTR

Seite 389

Access Navigator - Release 1.8 August 2003 17-15 Update Controller Card SoftwareDownload SoftwareCAUTION! THE FOLLOWING STEPS ARE REQUIRED FOR OLDE

Seite 390

Access Navigator - Release 1.8 August 2003 2-9 Access Navigator / DCS Service ManagerComplianceComplianceUSAl UL 1950, 3rd Editionl FCC Part 15, Clas

Seite 391

17-16 August 2003 Access Navigator - Release 1.8Update Controller Card SoftwareDownload Software17. Verify current Controller status and software vers

Seite 392

Access Navigator - Release 1.8 August 2003 17-17 Update Controller Card SoftwareUpdate Software via Xmodem (One Controller)Update Software via Xmodem

Seite 393

17-18 August 2003 Access Navigator - Release 1.8Update Controller Card SoftwarePrecautionsPrecautionsCAUTION! THIS PROCEDURE APPLIES ONLY TO ACCESS

Seite 394

Access Navigator - Release 1.8 August 2003 17-19 Update Controller Card SoftwareInformation and Materials RequiredInformation and Materials RequiredO

Seite 395 - Other Maintenance Commands

17-20 August 2003 Access Navigator - Release 1.8Update Controller Card SoftwareDownload Software3. Send load command to update active Controller with

Seite 396

Access Navigator - Release 1.8 August 2003 17-21 Update Controller Card SoftwareDownload Software6. Verify current Controller status and software ver

Seite 397 - Technical Support

17-22 August 2003 Access Navigator - Release 1.8Update Controller Card SoftwareDownload Software

Seite 398

CHAPTERCLI Language ReferenceIn this Chaptern Overview ... 18-2n CLI Requirements ... 18-3n CLI Conventions and Shortcuts ... 18-6n Online Help ... 18

Seite 399 - Maintenance Procedures

18-2 August 2003 Access Navigator - Release 1.8CLI Language ReferenceOverviewOverviewThe Command Line Interface (CLI) language uses simple text based

Seite 400 - Repair and Return Procedure

Access Navigator - Release 1.8 August 2003 18-3 CLI Language ReferenceCLI RequirementsCLI Requirementsn CLI over RS-232 ... 18-3n CLI over Telnet ...

Seite 401 - Replace Controller Card

2-10 August 2003 Access Navigator - Release 1.8Access Navigator / DCS Service ManagerCompliance RequirementsCompliance RequirementsFCC RequirementsThi

Seite 402

18-4 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI over TelnetRS-232 interface for modem connectionThese settings are for a mode

Seite 403 - Verify Equipment Status

Access Navigator - Release 1.8 August 2003 18-5 CLI Language ReferenceUsing CLI Command ScriptsUsing CLI Command ScriptsFor convenience, the operator

Seite 404 - Procedure Summary

18-6 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Conventions and ShortcutsCLI Conventions and Shortcutsl Command Categories ..

Seite 405 - Verify Compatibility

Access Navigator - Release 1.8 August 2003 18-7 CLI Language ReferenceText Conventionsl Errors in a command will produce an error message. The CLI wi

Seite 406

18-8 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCommand Syntax DescriptionsCommand Syntax DescriptionsThis reference manual uses

Seite 407 - Controller A Controller B

Access Navigator - Release 1.8 August 2003 18-9 CLI Language ReferenceEntering DS1 and DS0 Numbers and RangesEntering DS1 and DS0 Numbers and RangesC

Seite 408

18-10 August 2003 Access Navigator - Release 1.8CLI Language ReferenceOnline HelpOnline Helpn Help System Overview ... 18-10n Displaying Basic Command

Seite 409 - ALTER PROVISIONING

Access Navigator - Release 1.8 August 2003 18-11 CLI Language ReferenceContext Sensitive HelpContext Sensitive HelpNOTE: Context sensitive help does

Seite 410 - Replace Other Controller Card

18-12 August 2003 Access Navigator - Release 1.8CLI Language ReferenceContext Sensitive HelpMore details are provided as you type additional words for

Seite 411

Access Navigator - Release 1.8 August 2003 18-13 CLI Language ReferencePrinting the Help FilePrinting the Help FileNOTE: To disable automatic pausin

Seite 412

Access Navigator - Release 1.8 August 2003 2-11 Access Navigator / DCS Service ManagerTelcordia (Bellcore) Requirementsprovide advance notice in orde

Seite 413

18-14 August 2003 Access Navigator - Release 1.8CLI Language ReferenceUsers and PasswordsUsers and Passwordsn Administration ... 18-14n Access Levels

Seite 414 - Insert New Controller

Access Navigator - Release 1.8 August 2003 18-15 CLI Language ReferenceManaging UsersManaging UsersCLI provides the manager with commands to show cur

Seite 415 - Maintenance Procedures

18-16 August 2003 Access Navigator - Release 1.8CLI Language ReferenceManaging UsersDescription:Add UserUser names can be up to 10 characters long, an

Seite 416 - Remove Old Controller

Access Navigator - Release 1.8 August 2003 18-17 CLI Language ReferenceManaging UsersThe access settings are as follows.Set User PasswordPasswords ca

Seite 417 - Replace Quad T1 Framer Card

18-18 August 2003 Access Navigator - Release 1.8CLI Language ReferenceLogging In and OutLogging In and Outn Startup Message ... 18-18n Login with No U

Seite 418

Access Navigator - Release 1.8 August 2003 18-19 CLI Language ReferenceLogin with User Name RequiredLogin with User Name RequiredIf there is at least

Seite 419

18-20 August 2003 Access Navigator - Release 1.8CLI Language ReferenceLogout (Exit)Logout (Exit)When finished with a management session, it is importa

Seite 420

Access Navigator - Release 1.8 August 2003 18-21 CLI Language ReferenceCLI Command ListCLI Command Listn ACO ... 18-23n Add Interface ... 18-23n Add

Seite 421 - Replace Quad T1 Card

Access Navigator - Release 1.8 August 2003 18-22 CLI Language ReferenceCLI Command ListnSet DS1 Payload Loopup ... 18-112n Set DS1 Remote Device Mgmt

Seite 422

Access Navigator - Release 1.8 August 2003 18-23 CLI Language ReferenceCLI Command ListACOPurpose: Alarm Cutoff (ACO) command turns off all alarm rel

Seite 423

2-12 August 2003 Access Navigator - Release 1.8Access Navigator / DCS Service ManagerCSA RequirementsCSA RequirementsThis telecommunication network eq

Seite 424

18-24 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListEach remote port has a maximum number of DS0s that can be assign

Seite 425

Access Navigator - Release 1.8 August 2003 18-25 CLI Language ReferenceCLI Command ListAdd UserPurpose: This is a Level 1 command that allows a netwo

Seite 426

18-26 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListSyntax: alarms ds1 <n|all>Displays only DS1 alarms. You ca

Seite 427

Access Navigator - Release 1.8 August 2003 18-27 CLI Language ReferenceCLI Command ListClear BERT LogPurpose: Erases all data in the BERT log file, w

Seite 428

18-28 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListClear LogPurpose: Erases all data in the log file, which records

Seite 429

Access Navigator - Release 1.8 August 2003 18-29 CLI Language ReferenceCLI Command ListConnectPurpose: Creates two-way connections between DS0s or fr

Seite 430

18-30 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListFigure 18-2. Crossconnect Examplesconnect ds0 10:16 18:21conn

Seite 431

Access Navigator - Release 1.8 August 2003 18-31 CLI Language ReferenceCLI Command List*Note: Only ISDN D channels can be statically crossconnected b

Seite 432

18-32 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command Listassigned to another remote interface, you must use the disconnec

Seite 433

Access Navigator - Release 1.8 August 2003 18-33 CLI Language ReferenceCLI Command ListDelete UserPurpose: This is a Level 1 command that allows a ne

Seite 434

CHAPTERAccess Navigator / GR-303 + Data HostIn this Chaptern Overview ... 3-2n System Architecture ... 3-3n Features and Benefits ... 3-4n GR-303 Serv

Seite 435

18-34 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListDisconnect RemotePurpose: Removes the DS0 connections establishe

Seite 436

Access Navigator - Release 1.8 August 2003 18-35 CLI Language ReferenceCLI Command ListLoadCAUTION! TO AVOID SERVICE INTERRUPTIONS, FOLLOW PROCEDUR

Seite 437

18-36 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListAfter sending the load command, the CLI will respond with a seri

Seite 438 - INSTALL SIMM

Access Navigator - Release 1.8 August 2003 18-37 CLI Language ReferenceCLI Command ListLoad TFTP ConfigCAUTION! CONFIGURATION FILES ARE NOT COMPATI

Seite 439

18-38 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListExample: load tftp config 192.168.118.65 "AN26"LogPurp

Seite 440 - UPDATE SOFTWARE

Access Navigator - Release 1.8 August 2003 18-39 CLI Language ReferenceCLI Command ListExample: log ds1 6Example: log equipment minorExample: logMess

Seite 441 - Upload Configuration

18-40 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListLog BERTPurpose: Displays BERT (bit error rate test) events, whi

Seite 442 - Download Software

Access Navigator - Release 1.8 August 2003 18-41 CLI Language ReferenceCLI Command ListLog ConfigPurpose: Displays configuration log events. The Acce

Seite 443 - ANY USER

18-42 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListExample: log configDisplays all configuration management events.

Seite 444 - Download Configuration

Access Navigator - Release 1.8 August 2003 18-43 CLI Language ReferenceCLI Command ListLog TMCPurpose: Displays TMC (Timeslot Management Control) eve

Seite 445

Access Navigator - Release 1.8 August 2003 1vPrefaceElectrostatic Discharge (ESD) PrecautionsESD can damage processors, circuit boards, and other elec

Seite 446

3-2 August 2003 Access Navigator - Release 1.8Access Navigator / GR-303 + Data HostOverviewOverviewThe Access Navigator® / GR-303 + Data Host offers a

Seite 447

18-44 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListLogon RemotePurpose: Starts a remote CLI management session with

Seite 448

Access Navigator - Release 1.8 August 2003 18-45 CLI Language ReferenceCLI Command ListPingPurpose: Uses “Ping” (an Internet tool) to verify network

Seite 449 - NOT ASSIGNED TO ANY USER

18-46 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListMessage: Alarms: Current Accu

Seite 450

Access Navigator - Release 1.8 August 2003 18-47 CLI Language ReferenceCLI Command Listv35 rts Loss of V.35 Request to Sendv35 llb Local loopback det

Seite 451

18-48 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListRead Remote ConnectionsPurpose: Displays crossconnections betwee

Seite 452

Access Navigator - Release 1.8 August 2003 18-49 CLI Language ReferenceCLI Command ListTherefore, T1#2 channel 13 connects to FX#2 channel 1. Similar

Seite 453

18-50 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListRead Remote LogPurpose: Retrieves and displays the log from the

Seite 454

Access Navigator - Release 1.8 August 2003 18-51 CLI Language ReferenceCLI Command ListDescription: Read Remote LoopbackPurpose: Reads and displays

Seite 455

18-52 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListMessage: RS232: Port type: Subrate RTS: Not

Seite 456

Access Navigator - Release 1.8 August 2003 18-53 CLI Language ReferenceCLI Command ListExample: read remote 9 t1 performanceExample: read remote 9 t1

Seite 457 - CLI Language Reference

Access Navigator - Release 1.8 August 2003 3-3 Access Navigator / GR-303 + Data HostSystem ArchitectureSystem Architecture Figure 3-2. Access Navigat

Seite 458

18-54 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListRead Remote T1Purpose: Reads and displays the T1 settings from t

Seite 459 - CLI Requirements

Access Navigator - Release 1.8 August 2003 18-55 CLI Language ReferenceCLI Command ListRead Remote T1dropReads and displays the T1drop settings from

Seite 460 - CLI over Telnet

18-56 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListRead Remote V35Purpose: Reads and displays the V.35 settings fro

Seite 461 - Using CLI Command Scripts

Access Navigator - Release 1.8 August 2003 18-57 CLI Language ReferenceCLI Command ListReset AllCAUTION! THE “RESET ALL” COMMAND WILL INTERRUPT SER

Seite 462 - CLI Conventions and Shortcuts

18-58 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListReset RemoteCAUTION! THE “RESET REMOTE” COMMAND WILL DISRUPT T

Seite 463 - Text Conventions

Access Navigator - Release 1.8 August 2003 18-59 CLI Language ReferenceCLI Command ListRestore DefaultsCAUTION! THE RESTORE COMMAND WILL INTERRUPT

Seite 464 - Command Syntax Descriptions

18-60 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListDS1 circuit identifier CA DS1 #nn = DS1 numberDS1 clock source N

Seite 465 - Keyboard Shortcuts

Access Navigator - Release 1.8 August 2003 18-61 CLI Language ReferenceCLI Command ListTMC primary 25:24 Follows DS1 term IDTMC secondary 29:24 Follo

Seite 466 - Displaying Basic Commands

18-62 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListSend DS1 CSU LoopupNOTE: The DS1 must be set Out of Service, us

Seite 467 - Context Sensitive Help

Access Navigator - Release 1.8 August 2003 18-63 CLI Language ReferenceCLI Command ListSecurity: Level 2 (operator)Syntax: send ds1 <n> csu <

Seite 468

3-4 August 2003 Access Navigator - Release 1.8Access Navigator / GR-303 + Data HostFeatures and BenefitsFeatures and BenefitsThe Access Navigator / GR

Seite 469 - Syntax: print help

18-64 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListPurpose: Sends an out-of-band (FDL) line loopup or loopdown code

Seite 470 - Users and Passwords

Access Navigator - Release 1.8 August 2003 18-65 CLI Language ReferenceCLI Command ListExample: send ds1 9 line loopupMessage: Loopup signal sent to

Seite 471 - Syntax: show users

18-66 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListPurpose: Transmits an unframed test pattern to verify the qualit

Seite 472

Access Navigator - Release 1.8 August 2003 18-67 CLI Language ReferenceCLI Command ListExample: set ds1 9 line p2e15The CLI will provide a progress m

Seite 473 - Delete User

18-68 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListFigure 18-6. Send DS1 Line Pattern with BER TestSecurity: Level

Seite 474 - Logging In and Out

Access Navigator - Release 1.8 August 2003 18-69 CLI Language ReferenceCLI Command ListMessage: Waiting for pattern sync...ok. Testing line...

Seite 475 - Login with Password Required

18-70 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListSend DS1 Network LoopupNOTE: The DS1 must be set Out of Service

Seite 476 - Example: set autoexit 60

Access Navigator - Release 1.8 August 2003 18-71 CLI Language ReferenceCLI Command ListSyntax: send ds1 <n> network <loopup|loopdown>Exam

Seite 477 - CLI Command List

18-72 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListNIU loopups can be used with either unframed (line) or framed (p

Seite 478 - CLI Language Reference

Access Navigator - Release 1.8 August 2003 18-73 CLI Language ReferenceCLI Command ListThe above message indicates that the loopup code was sent and

Seite 479 - Syntax: aco

Access Navigator - Release 1.8 August 2003 3-5 Access Navigator / GR-303 + Data HostGR-303 ServicesCA's Access Navigator / GR-303 + Data Host, t

Seite 480 - Security: Level 2 (operator)

18-74 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListNOTE: This command will send one of the following T1.403 define

Seite 481 - Add User

Access Navigator - Release 1.8 August 2003 18-75 CLI Language ReferenceCLI Command Listmessage ends with “loopup still present” the far-end equipment

Seite 482

18-76 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListFigure 18-10. Send DS1 Payload PatternSecurity: Level 2 (operato

Seite 483 - Clear DS1 Performance

Access Navigator - Release 1.8 August 2003 18-77 CLI Language ReferenceCLI Command ListExample: send ds1 9 payload p2e15The CLI will provide a progre

Seite 484 - Clear TMC Log

18-78 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListAfter 10 seconds the pattern is turned off and the test results

Seite 485

Access Navigator - Release 1.8 August 2003 18-79 CLI Language ReferenceCLI Command ListExample: set ds1 9 payload p2e15 testFor p2e, qrss, and all-on

Seite 486

18-80 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListExample: send ds1 9 payload f1in8 testFor the 1-in-8 and all-zer

Seite 487 - Connect Remote Interface

Access Navigator - Release 1.8 August 2003 18-81 CLI Language ReferenceCLI Command ListSend DS1 OffPurpose: Stops (turns off) all qrss and prbs test

Seite 488 - Delete Interface

18-82 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListSend Remote RS232 Line LoopupNOTE: This command applies only to

Seite 489 - Disconnect

Access Navigator - Release 1.8 August 2003 18-83 CLI Language ReferenceCLI Command ListMessage: Loop command sent to remote.Send Remote RS232 TSI Loo

Seite 490 - Exit Remote Session (Ctrl+C)

3-6 August 2003 Access Navigator - Release 1.8Access Navigator / GR-303 + Data HostDCS ServicesDCS ServicesThe Access Navigator provides all the groom

Seite 491 - ON page 17-1

18-84 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListFigure 18-14. Remote RS-232 TSI Equipment LoopupSecurity: Level

Seite 492

Access Navigator - Release 1.8 August 2003 18-85 CLI Language ReferenceCLI Command ListWhen the operator enters a send remote command, the Access Nav

Seite 493 - ALL ON page 18-57)

18-86 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListNOTE: To check remote loopback status, use the read remote loop

Seite 494

Access Navigator - Release 1.8 August 2003 18-87 CLI Language ReferenceCLI Command Listremote loopdown command.NOTE: Only one port of the Access Ban

Seite 495 - Example: log

18-88 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListSend Remote T1Drop Line LoopupNOTE: This command applies only t

Seite 496

Access Navigator - Release 1.8 August 2003 18-89 CLI Language ReferenceCLI Command ListMessage: Loop command sent to remote.Send Remote T1Drop Payloa

Seite 497 - Log Config

18-90 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListSyntax: send remote <n> t1drop payload loopupExample: send

Seite 498 - Example: log config

Access Navigator - Release 1.8 August 2003 18-91 CLI Language ReferenceCLI Command ListFigure 18-20. Remote T1 Drop TSI LoopupSecurity: Level 2 (oper

Seite 499

18-92 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command Listsignal, loops it in theV.35 interface, and sends it back to the

Seite 500 - Example: logon remote 12

Access Navigator - Release 1.8 August 2003 18-93 CLI Language ReferenceCLI Command ListSend Remote V35 TSI LoopupNOTE: This command applies only to

Seite 501 - Read Remote Alarms

Access Navigator - Release 1.8 August 2003 3-7 Access Navigator / GR-303 + Data HostManagement ArchitectureManagement ArchitectureAccess Navigators p

Seite 502

18-94 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListFigure 18-23. Remote V.35 TSI Equipment LoopupSecurity: Level 2

Seite 503

Access Navigator - Release 1.8 August 2003 18-95 CLI Language ReferenceCLI Command ListSet AlarmsPurpose: Allows the user to test the Access Navigato

Seite 504

18-96 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListSet ClockPurpose: Selects the system master transmit clock sourc

Seite 505

Access Navigator - Release 1.8 August 2003 18-97 CLI Language ReferenceCLI Command ListSet CRV IdlePurpose: Clears a permanent off-hook call state (s

Seite 506 - Example: read remote 9 log

18-98 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListPurpose: Assigns a range of DS0s to a range of CRVs. The switch

Seite 507 - Read Remote RS232

Access Navigator - Release 1.8 August 2003 18-99 CLI Language ReferenceCLI Command ListExample: set ds0 5:13 crv 122Example: set ds0 4:9-16 crv 111-1

Seite 508

18-100 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListFigure 18-26. DS0s Assigned to CRVs in Odd-Even Order1234567891

Seite 509

Access Navigator - Release 1.8 August 2003 18-101 CLI Language ReferenceCLI Command ListSet DS0 ISDN BRI CRVPurpose: This command does three things.

Seite 510 - Read Remote T1

18-102 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListSet DS0 P-PhonePurpose: Assigns DS0 channels for P-Phone servic

Seite 511 - Example: read remote 9 t1drop

Access Navigator - Release 1.8 August 2003 18-103 CLI Language ReferenceCLI Command ListSet DS0 ServicePurpose: Sets a DS0 channel, or range of chann

Seite 512 - Read Remote V35

3-8 August 2003 Access Navigator - Release 1.8Access Navigator / GR-303 + Data HostFDL ManagementFDL ManagementWhen T1 Type I lines are available, the

Seite 513 - Reset DS1 Framer

18-104 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListSet DS0 SignalPurpose: Specifies the signaling on the DS0 chann

Seite 514 - Reset Standby

Access Navigator - Release 1.8 August 2003 18-105 CLI Language ReferenceCLI Command ListFigure 18-27. Signaling Used in Common ApplicationsSet DS0 Ty

Seite 515 - Syntax: restore defaults

18-106 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListSyntax: set ds0 <n:ch> type <data|voice|gr303>Examp

Seite 516

Access Navigator - Release 1.8 August 2003 18-107 CLI Language ReferenceCLI Command ListThe application affects the permissible DS1 Type, Framing, Li

Seite 517

18-108 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListSyntax: set ds1 <n> fdl <none|slc96|t1403>Example:

Seite 518 - Send DS1 CSU Loopup

Access Navigator - Release 1.8 August 2003 18-109 CLI Language ReferenceCLI Command ListSet DS1 IDPurpose: Sets the carrier’s DS1 circuit identifier

Seite 519 - Send DS1 Line Loopup

18-110 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListFigure 18-28. DS1 Line LoopbackSecurity: Level 2 (operator)Synt

Seite 520

Access Navigator - Release 1.8 August 2003 18-111 CLI Language ReferenceCLI Command ListSet DS1 LoopdetectPurpose: This is a near-end maintenance com

Seite 521

18-112 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListSet DS1 Payload LoopupPurpose: Provides payload loopback to ver

Seite 522

Access Navigator - Release 1.8 August 2003 18-113 CLI Language ReferenceCLI Command ListSet DS1 Remote Device MgmtPurpose: Sets the remote device man

Seite 523 - Example: set ds1 9 line p2e15

Access Navigator - Release 1.8 August 2003 3-9 Access Navigator / GR-303 + Data HostConfigurationConfigurationThe Access Navigator / GR-303 + Data Ho

Seite 524

18-114 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListSet DS1 ServicePurpose: Places DS1s in service or out of servic

Seite 525

Access Navigator - Release 1.8 August 2003 18-115 CLI Language ReferenceCLI Command ListSyntax: set ds1 <n> termid <id>Example: set ds1 5

Seite 526

18-116 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListSet DS1 TypePurpose: Sets DS1 type. The Access Navigator allows

Seite 527 - Send DS1 NIU Loopup

Access Navigator - Release 1.8 August 2003 18-117 CLI Language ReferenceCLI Command ListSecurity: Level 2 (operator)Syntax: set eoc <primary|secon

Seite 528

18-118 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListExample: set ethernet ip address 192.168.118.65 255.255.255.0Ex

Seite 529 - Send DS1 Payload Loopup

Access Navigator - Release 1.8 August 2003 18-119 CLI Language ReferenceCLI Command ListSyntax: set ip gateway <address>Example: set ip gateway

Seite 530

18-120 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListSyntax: set remote config <n> <on|off>Example: set

Seite 531

Access Navigator - Release 1.8 August 2003 18-121 CLI Language ReferenceCLI Command ListSyntax: set remote <n> rs232 baud <setting>Exampl

Seite 532

18-122 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListSet Remote T1Drop FramingCAUTION! IF THE T1 DROP ON THE ACCES

Seite 533 - Example: set ds1 9 down

Access Navigator - Release 1.8 August 2003 18-123 CLI Language ReferenceCLI Command ListSet Remote T1Drop LBOPurpose: This command sets the T1 Drop l

Seite 534

3-10 August 2003 Access Navigator - Release 1.8Access Navigator / GR-303 + Data HostApplicationsApplicationsl T1 Service POP-In-A-Box: Customer-locate

Seite 535

18-124 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListSet Remote T1Drop PRMPurpose: Sets the T1 Drop performance mess

Seite 536

Access Navigator - Release 1.8 August 2003 18-125 CLI Language ReferenceCLI Command ListSet Remote V35 CTSPurpose: Sets the Access Bank II V.35 inter

Seite 537 - Send Remote Loopdown

18-126 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListSet Remote V35 DSUPurpose: Determines if the Access Bank II V.3

Seite 538

Access Navigator - Release 1.8 August 2003 18-127 CLI Language ReferenceCLI Command ListSecurity: Level 2 (operator)Syntax: set remote <n> v35

Seite 539 - Send Remote RS232 TSI Loopup

18-128 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListSet SNMP ContactPurpose: Assigns a system contact name (sysCont

Seite 540

Access Navigator - Release 1.8 August 2003 18-129 CLI Language ReferenceCLI Command ListSet SNMP LocationPurpose: Assigns a system location (sysLocat

Seite 541

18-130 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListSet SNMP NMS AddressPurpose: Assigns an IP address for use by t

Seite 542

Access Navigator - Release 1.8 August 2003 18-131 CLI Language ReferenceCLI Command ListSet SNMP TrapComAssigns a Trap-Community string (trapCommunit

Seite 543

18-132 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListSet TimePurpose: Set Access Navigator system clock time. Securi

Seite 544

Access Navigator - Release 1.8 August 2003 18-133 CLI Language ReferenceCLI Command ListSyntax: set tmc <primary|secondary> <n:ch|none>Ex

Seite 545

Access Navigator - Release 1.8 August 2003 3-11 Access Navigator / GR-303 + Data HostSpecificationsSpecificationsGR-303 Operationl Up to 32 T1s per s

Seite 546 - Send Remote T1Drop TSI Loopup

18-134 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListExample: set user "alice" level 2Set User PasswordPur

Seite 547

Access Navigator - Release 1.8 August 2003 18-135 CLI Language ReferenceCLI Command ListShow AutoexitPurpose: Displays the current setting for the au

Seite 548

18-136 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListSecurity: Level 3 (monitor)Syntax: show connect <n>Exampl

Seite 549 - Send Remote V35 TSI Loopup

Access Navigator - Release 1.8 August 2003 18-137 CLI Language ReferenceCLI Command ListShow CRVPurpose: Displays the range of CRVs requested (up to

Seite 550 - Send Switch Provision Request

18-138 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command List3 DS1 #1 channel 3 In Service4 DS1 #1 channel 4

Seite 551 - Set Autoexit

Access Navigator - Release 1.8 August 2003 18-139 CLI Language ReferenceCLI Command ListShow DatePurpose: Display Access Navigator system clock date.

Seite 552 - Set Clock

18-140 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListSettings for DS1 13, Channel 4:Type: GR303Up/Down: UPCRV: 38PPH

Seite 553

Access Navigator - Release 1.8 August 2003 18-141 CLI Language ReferenceCLI Command ListMessage:Settings for DS1 9: Circuit ID: CA DS1#

Seite 554

18-142 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListPPHONE Call ConnectionENABLED, DISABLED. This setting is enable

Seite 555 - Example: set ds0 5:13 crv 122

Access Navigator - Release 1.8 August 2003 18-143 CLI Language ReferenceCLI Command ListShow DS1 AllPurpose: This command provides an abbreviated lis

Seite 556

1vi August 2003 Access Navigator - Release 1.8PrefaceCarrier Access Software License AgreementPLEASE CAREFULLY READ THE FOLLOWING TERMS AND CONDITIONS

Seite 557 - Set DS0 ISDN BRI CRV

3-12 August 2003 Access Navigator - Release 1.8Access Navigator / GR-303 + Data HostGR-303 SignalingGR-303 Signalingl GR-303 ABCD robbed-bit signal co

Seite 558 - Set DS0 P-Phone

18-144 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command List CA DS1# 19 DOWN DROP B8ZS ESF

Seite 559 - Example: set ds0 13:1-16 up

Access Navigator - Release 1.8 August 2003 18-145 CLI Language ReferenceCLI Command ListShow EOCPurpose: Displays the current primary and secondary T

Seite 560

18-146 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListShow IDPurpose: Displays the System Identifier assigned to the

Seite 561

Access Navigator - Release 1.8 August 2003 18-147 CLI Language ReferenceCLI Command ListSyntax: show interface <"name"|all>Example: s

Seite 562 - Set DS1 FDL

18-148 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListShow IPPurpose: The Ethernet port on the Access Navigator provi

Seite 563

Access Navigator - Release 1.8 August 2003 18-149 CLI Language ReferenceCLI Command ListSyntax: show isdn crv <range>Example: show isdn crv 6Ex

Seite 564 - Set DS1 Framing

18-150 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListShow RemotePurpose: Displays the port settings for the remote A

Seite 565 - Set DS1 Line Loopup

Access Navigator - Release 1.8 August 2003 18-151 CLI Language ReferenceCLI Command ListShow Remote ConnectionsPurpose: Displays crossconnections bet

Seite 566 - Set DS1 Linecode

18-152 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListNOTE: An Access Navigator DS1 may connect to either T1 port of

Seite 567

Access Navigator - Release 1.8 August 2003 18-153 CLI Language ReferenceCLI Command ListDescription:Show SNMPPurpose: Displays the current snmp setti

Seite 568

Access Navigator - Release 1.8 August 2003 3-13 Access Navigator / GR-303 + Data HostComplianceComplianceUSAl UL 1950, 3rd Editionl FCC Part 15, Clas

Seite 569 - Set DS1 Remote Device Mgmt

18-154 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListShow SwitchPurpose: Displays the current switch setting, use th

Seite 570 - Set DS1 TermID

Access Navigator - Release 1.8 August 2003 18-155 CLI Language ReferenceCLI Command ListShow UsersPurpose: Shows current user settings and status.NOT

Seite 571 - Set DS1 Threshold

18-156 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListStatus ClockPurpose: Displays the currently active clock source

Seite 572

Access Navigator - Release 1.8 August 2003 18-157 CLI Language ReferenceCLI Command ListStatus CRVPurpose: Displays the status of the specified CRV n

Seite 573 - Set Ethernet IP Address

18-158 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListStatus DS0Purpose: Displays the status for each DS0 specified (

Seite 574 - Set IP Gateway Address

Access Navigator - Release 1.8 August 2003 18-159 CLI Language ReferenceCLI Command ListStatus DS1Purpose: Displays a detailed DS1 service status mes

Seite 575 - Example: set ip gateway none

18-160 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListDescription:Item DescriptionReceive Traffic – normal operation.

Seite 576 - Set Remote RS232 Baud

Access Navigator - Release 1.8 August 2003 18-161 CLI Language ReferenceCLI Command ListStatus DS1 AllPurpose: Displays an abbreviated list showing t

Seite 577 - Set Remote RS232 Stop

18-162 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListStatus DS1 PerformancePurpose: Displays current performance dat

Seite 578

Access Navigator - Release 1.8 August 2003 18-163 CLI Language ReferenceCLI Command ListThe status performance message will include an asterisk (*) t

Seite 579 - Set Remote T1Drop Linecode

3-14 August 2003 Access Navigator - Release 1.8Access Navigator / GR-303 + Data HostCompliance RequirementsCompliance RequirementsFCC RequirementsThis

Seite 580 - Set Remote V35 ClockInv

18-164 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListErrored Seconds (ES) For ESF links, the number of one-second in

Seite 581 - Set Remote V35 Data

Access Navigator - Release 1.8 August 2003 18-165 CLI Language ReferenceCLI Command ListStatus DS1 Performance HistoryPurpose: Displays a tabular lis

Seite 582 - Set Remote V35 Speed

18-166 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command List prev. intvl 1: 0 900 0 0 0 0 900 15

Seite 583 - Set Screen

Access Navigator - Release 1.8 August 2003 18-167 CLI Language ReferenceCLI Command ListStatus EOCPurpose: Displays detailed EOC service status messa

Seite 584 - Set SNMP GetCom

18-168 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListStatus EquipmentPurpose: Displays the status of all cards insta

Seite 585 - Set SNMP Name

Access Navigator - Release 1.8 August 2003 18-169 CLI Language ReferenceCLI Command ListExample: status equipment allMessage:Equipment Status

Seite 586 - Set SNMP SetCom

18-170 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListStatus IPPurpose: The Ethernet port on the Access Navigator pro

Seite 587 - Set Switch Type

Access Navigator - Release 1.8 August 2003 18-171 CLI Language ReferenceCLI Command ListStatus ISDN CRVPurpose: Displays a message listing the status

Seite 588

18-172 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListStatus RemotePurpose: Displays a message listing the remote ter

Seite 589 - Set User Level

Access Navigator - Release 1.8 August 2003 18-173 CLI Language ReferenceCLI Command ListMessage: DS1 Terminal ID

Seite 590

Access Navigator - Release 1.8 August 2003 3-15 Access Navigator / GR-303 + Data HostTelcordia (Bellcore) Requirementsprovide advance notice in order

Seite 591 - Show Connect

18-174 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command List Secondary Channel: DS1 #29 channel 24 Link

Seite 592

Access Navigator - Release 1.8 August 2003 18-175 CLI Language ReferenceCLI Command ListStatus TMC HistoryPurpose: Displays TMC call history for the

Seite 593 - Show CRV

18-176 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command ListSwitch ControllerCAUTION! SWITCHING CONTROLLERS WILL DISRUPT

Seite 594

Access Navigator - Release 1.8 August 2003 18-177 CLI Language ReferenceCLI Command ListSyntax: upload tftp config <ipaddr> <"file"

Seite 595 - Show DS0

18-178 August 2003 Access Navigator - Release 1.8CLI Language ReferenceCLI Command List

Seite 596 - Show DS1

APPENDIXEOC InterfaceIn this Chaptern Overview ... A-2n Managed Object Class Support ... A-4n Actions ... A-17n Notifications ... A-18

Seite 597

A-2 August 2003 Access Navigator - Release 1.8EOC InterfaceOverviewOverviewThe Access Navigator GR-303 complies with Telcordia® (Bellcore) standard GR

Seite 598

Access Navigator - Release 1.8 August 2003 A-3EOC InterfaceOverviewmanagement functions. Attributes associated with an object describe its properties.

Seite 599 - Syntax: show ds1 all

A-4 August 2003 Access Navigator - Release 1.8EOC InterfaceManaged Object Class SupportManaged Object Class SupportThe following tables list the manag

Seite 600

Access Navigator - Release 1.8 August 2003 A-5EOC InterfaceAnalog Line Termination ObjectsAnalog Line Termination ObjectsThis object class is used to

Seite 601 - Show Ethernet

3-16 August 2003 Access Navigator - Release 1.8Access Navigator / GR-303 + Data HostCSA RequirementsCSA RequirementsThis telecommunication network equ

Seite 602 - Show Interface

A-6 August 2003 Access Navigator - Release 1.8EOC InterfaceDS0 Channel Termination ObjectsDS0 Channel Termination ObjectsThis object class is used to

Seite 603

Access Navigator - Release 1.8 August 2003 A-7EOC InterfaceDS1 Line Termination ObjectsDS1 Line Termination ObjectsThis object class is used to manage

Seite 604 - Show ISDN CRV

A-8 August 2003 Access Navigator - Release 1.8EOC InterfaceISDN Line Termination ObjectsISDN Line Termination ObjectsThis object class is used to mana

Seite 605 - Example: show isdn crv 1-8

Access Navigator - Release 1.8 August 2003 A-9EOC InterfaceISDN Framed Path Termination ObjectscvHrCurrent Yes YescvFeHrCurrent Yes YescvHrPrevious Ye

Seite 606 - Show Remote

A-10 August 2003 Access Navigator - Release 1.8EOC InterfaceQuarter DS0 Channel TerminationQuarter DS0 Channel TerminationThis object class is created

Seite 607

Access Navigator - Release 1.8 August 2003 A-11EOC InterfaceEquipment ObjectsEquipment ObjectsThis object class represents equipment within the networ

Seite 608

A-12 August 2003 Access Navigator - Release 1.8EOC InterfaceIDLC Data Link Profile ObjectsIDLC Data Link Profile ObjectsThis object class represents t

Seite 609 - Show SNMP

Access Navigator - Release 1.8 August 2003 A-13EOC InterfaceIDLC Data Link Termination ObjectsIDLC Data Link Termination ObjectsThis object class deli

Seite 610 - Show TMC

A-14 August 2003 Access Navigator - Release 1.8EOC InterfaceIDLC Terminal ObjectsIDLC Terminal ObjectsThis object class represents the logical termina

Seite 611

Access Navigator - Release 1.8 August 2003 A-15EOC InterfaceNetwork Element ObjectsNetwork Element ObjectsThis object class represents telecommunicati

Seite 612

CHAPTERAccess Navigator / GR-303 Host withP-PhoneIn this Chaptern Overview ... 4-2n System Architecture ... 4-3n Features and Benefits ... 4-4n GR-303

Seite 613 - Status CRV

A-16 August 2003 Access Navigator - Release 1.8EOC InterfaceProtection Group Unit ObjectsProtection Group Unit ObjectsThis object class represents wor

Seite 614 - Status DS0

Access Navigator - Release 1.8 August 2003 A-17EOC InterfaceActionsActionsThe Access Navigator supports actions for the following managed objects. Bla

Seite 615 - Status DS1

A-18 August 2003 Access Navigator - Release 1.8EOC InterfaceNotificationsNotificationsThe Access Navigator provides event report notifications (alarms

Seite 616

APPENDIXFDL InterfaceIn this Chaptern Overview ... B-2n Remote Provisioning Requirements ... B-3n Remote Provisioning Capabilities ... B-4

Seite 617

B-2 August 2003 Access Navigator - Release 1.8FDL InterfaceOverviewOverviewThe Facility Data Link (FDL) interface is a management channel in the T1 Ex

Seite 618 - Status DS1 Performance

Access Navigator - Release 1.8 August 2003 B-3FDL InterfaceRemote Provisioning RequirementsRemote Provisioning RequirementsRemote provisioning, manage

Seite 619

B-4 August 2003 Access Navigator - Release 1.8FDL InterfaceRemote Provisioning CapabilitiesRemote Provisioning CapabilitiesThe Access Navigator works

Seite 620

Access Navigator - Release 1.8 August 2003 B-5FDL InterfaceAccess Bank II CapabilitiesRS-232 interface Asynchronous RS-232 port for subrate data conne

Seite 621

B-6 August 2003 Access Navigator - Release 1.8FDL InterfaceAccess Bank II Capabilities

Seite 622

APPENDIXSNMP InterfaceIn this Chaptern Overview ... C-2n Carrier Access Enterprise MIB ... C-3n SNMP Basics ... C-4n SNMP Trap Reports ... C-9

Seite 623

4-2 August 2003 Access Navigator - Release 1.8Access Navigator / GR-303 Host with P-PhoneOverviewOverviewThe Access Navigator® / GR-303 Host with P-Ph

Seite 624 - Status Equipment

C-2 August 2003 Access Navigator - Release 1.8SNMP InterfaceOverviewOverviewThe Simple Network Management Protocol (SNMP) enables network operations c

Seite 625 - Example: status equipment all

Access Navigator - Release 1.8 August 2003 C-3SNMP InterfaceCarrier Access Enterprise MIBCarrier Access Enterprise MIBThe CA Enterprise MIB (Figure C-

Seite 626

C-4 August 2003 Access Navigator - Release 1.8SNMP InterfaceSNMP BasicsSNMP Basicsn MIB Structure ... C-4n MIB Tables ... C-5n Managing Networks ... C

Seite 627 - Status ISDN CRV

Access Navigator - Release 1.8 August 2003 C-5SNMP InterfaceMIB TablesMIB TablesRelated objects are normally grouped together to form a table. For exa

Seite 628

C-6 August 2003 Access Navigator - Release 1.8SNMP InterfaceManaging NetworksManaging NetworksThe SNMP standard MIB is used to manage basic network ob

Seite 629 - Link Status: Up

Access Navigator - Release 1.8 August 2003 C-7SNMP InterfaceSNMP ProtocolsSNMP ProtocolsThe Manager and Agent are software applications. They communic

Seite 630

C-8 August 2003 Access Navigator - Release 1.8SNMP InterfaceSNMP RequirementsSNMP RequirementsCLI commands must be used to configure the Access Naviga

Seite 631 - Status TMC History

Access Navigator - Release 1.8 August 2003 C-9SNMP InterfaceSNMP Trap ReportsSNMP Trap ReportsThe Access Navigator can send the following SNMP trap re

Seite 632 - Syntax: switch controller

C-10 August 2003 Access Navigator - Release 1.8SNMP InterfaceSNMP Trap Reports

Seite 633

GLOSSARYAbbreviations/AcronymsABI Access Bank IABII Access Bank IIADSL Asymmetrical Digital Subscriber LineAIS Alarm Indication SignalAMI Alternate Ma

Seite 634

Access Navigator - Release 1.8 August 2003 4-3 Access Navigator / GR-303 Host with P-PhoneSystem ArchitectureSystem Architecture Figure 4-2. Access N

Seite 635 - APPENDIX

GlossaryGlossaryGlossaryGlossary-2 August 2003 Access Navigator - Release 1.8GlossaryDCE Data Communications EquipmentDCS Digital Crossconnect SystemD

Seite 636

Access Navigator - Release 1.8 August 2003 GlossaryGlossary-3 GlossaryLULT Line Unit Line TerminationLUNT Line Unit Network TerminationMbps Megabits

Seite 637 - EOC Interface

GlossaryGlossaryGlossaryGlossary-4 August 2003 Access Navigator - Release 1.8GlossaryDefinitions3DS0 Mode An ISDN BRI termination method that connects

Seite 638 - Managed Object Class Support

violations that is identified by the recipient and then removed in the decoding process to recreate the original string of zeros.Bandwidth Information

Seite 639 - Alarm Count List Objects

Circuit IdentifierA character string assigned by the circuit vendor, which is useful when communicating with the vendor during the troubleshooting pro

Seite 640

Access Navigator - Release 1.8 August 2003 GlossaryGlossary-7 GlossaryData Terminal EquipmentDTE. See description at Data Communications Equipment (D

Seite 641 - EBS Line Termination Objects

GlossaryGlossaryGlossaryGlossary-8 August 2003 Access Navigator - Release 1.8GlossaryE1 European CEPT digital signal level 1, similar to the North Ame

Seite 642 - ISDN Line Termination Objects

Access Navigator - Release 1.8 August 2003 GlossaryGlossary-9 GlossaryGR-303 A Telcordia® (formerly Bellcore) generic requirement describing a digita

Seite 643

GlossaryGlossaryGlossaryGlossary-10 August 2003 Access Navigator - Release 1.8GlossaryLine Loopback A connection that loops back the entire signal alo

Seite 644 - Crossconnection

Access Navigator - Release 1.8 August 2003 GlossaryGlossary-11 GlossaryPayload The portion of a framed signal that carries services, such as voice or

Seite 645 - Equipment Objects

4-4 August 2003 Access Navigator - Release 1.8Access Navigator / GR-303 Host with P-PhoneFeatures and BenefitsFeatures and BenefitsThe Access Navigato

Seite 646

GlossaryGlossaryGlossaryGlossary-12 August 2003 Access Navigator - Release 1.8GlossaryStratum Stratum or Stratum Level refers to the accuracy of the c

Seite 647

Access Navigator - Release 1.8 August 2003 GlossaryGlossary-13 GlossaryV.35 An international ITU-T standard for data transmission up to 1.544 Mbps (T

Seite 648 - Memory Objects

GlossaryGlossaryGlossaryGlossary-14 August 2003 Access Navigator - Release 1.8Glossary

Seite 649 - Protection Group Objects

INDEXNumerics10Base-T . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Glossary-419-Inch Rack Mount, Horizontal . . . . . . . . . . . . . .

Seite 650 - Protection Group Unit Objects

Index 1-2 August 2003 Access Navigator - Release 1.8IndexReporting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-3Signaling – Red,

Seite 651 - Table A-20 Action Support

Access Navigator - Release 1.8 August 2003 Index - 3 IndexT1 Drop Interface (ABII) . . . . . . . . . . . . . . . . . . . B-5T1 Interface (ABII) . .

Seite 652 - Notifications

Index 1-4 August 2003 Access Navigator - Release 1.8IndexElectrical Installation . . . . . . . . . . . . . . . . . . . 6-2Maintenance . . . . . . . .

Seite 653

Access Navigator - Release 1.8 August 2003 Index - 5 IndexSet DS0 ISDN BRI . . . . . . . . . . . . . . . . . . . . .18-100Show . . . . . . . . . .

Seite 654

Index 1-6 August 2003 Access Navigator - Release 1.8IndexService, Set . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-102Show . . . . . . .

Seite 655 - FDL Interface

Access Navigator - Release 1.8 August 2003 Index - 7 IndexEnvironmental . . . . . . . . . . . . . . . . . . . . . . 2-9, 3-13, 4-14EOC . . . . . .

Seite 656 - Access Bank II Capabilities

Access Navigator - Release 1.8 August 2003 4-5 Access Navigator / GR-303 Host with P-PhoneGR-303 ServicesFigure 4-3. Access Navigator / GR-303 Host w

Seite 657

Index 1-8 August 2003 Access Navigator - Release 1.8IndexGetCom, Set SNMP . . . . . . . . . . . . . . . . . . . . . . . . 18-127GR-1089-CORE . . . . .

Seite 658

Access Navigator - Release 1.8 August 2003 Index - 9 IndexShow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18-145T1 Capabilities

Seite 659

Index 1-10 August 2003 Access Navigator - Release 1.8IndexLocation, Set SNMP . . . . . . . . . . . . . . . . . . . . . . . 18-128Locations, Indicato

Seite 660

Access Navigator - Release 1.8 August 2003 Index - 11 IndexMDA System Architecture, Access Navigator . . . . . . .1-4Memory Objects . . . . . . . .

Seite 661 - Carrier Access Enterprise MIB

Index 1-12 August 2003 Access Navigator - Release 1.8IndexOut of ServiceUnused Circuits . . . . . . . . . . . . . . . . . . . . . . . . . 10-13Overhea

Seite 662 - SNMP Basics

Access Navigator - Release 1.8 August 2003 Index - 13 IndexPrecautions 5-4, 5-7, 5-11, 5-15, 6-5, 6-8, 6-17, 6-27, 6-31, .6-35, 6-49, 6-55, 16-4, 16-

Seite 663 - MIB Tables

Index 1-14 August 2003 Access Navigator - Release 1.8IndexRead RemoteAlarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-45Conne

Seite 664 - Managing Networks

Access Navigator - Release 1.8 August 2003 Index - 15 IndexRxClock, Set . . . . . . . . . . . . . . . . . . . . . . .18-125Speed, Set . . . . . . . .

Seite 665 - SNMP Protocols

Index 1-16 August 2003 Access Navigator - Release 1.8IndexLine Pattern with BER Test . . . . . . . . . . . . 15-46Network Loopup . . . . . . . . . .

Seite 666 - SNMP Requirements

Access Navigator - Release 1.8 August 2003 Index - 17 IndexRemoteConfig . . . . . . . . . . . . . . . . . . . . . . . . . . . .18-118ID . . . . . .

Seite 667 - SNMP Trap Reports

Access Navigator - Release 1.8 August 2003 1viiPrefaceLICENSEE agrees that it will not export or re-export the Software in any form without the approp

Seite 668 - SNMP Interface

4-6 August 2003 Access Navigator - Release 1.8Access Navigator / GR-303 Host with P-PhoneP-Phone ServicesP-Phone ServicesThe Access Navigator / GR-303

Seite 669 - GLOSSARY

Index 1-18 August 2003 Access Navigator - Release 1.8IndexProtocols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C-7Requirements

Seite 670

Access Navigator - Release 1.8 August 2003 Index - 19 IndexSystem Overview, Help . . . . . . . . . . . . . . . . . . . . . .18-10TT1 . . . . . . .

Seite 671

Index 1-20 August 2003 Access Navigator - Release 1.8IndexTrapCom, Set SNMP . . . . . . . . . . . . . . . . . . . . . . . 18-130Troubleshooting &

Seite 672 - Definitions

Access Navigator - Release 1.8 August 2003 Index - 21 IndexWWall Mount, Vertical . . . . . . . . . . . . . . . . . . . . . . . . .5-15WAN . . . . .

Seite 673

Index 1-22 August 2003 Access Navigator - Release 1.8Index

Seite 674

Access Navigator - Release 1.8 August 2003 4-7 Access Navigator / GR-303 Host with P-PhoneDCS ServicesDCS ServicesThe Access Navigator provides all t

Seite 675

4-8 August 2003 Access Navigator - Release 1.8Access Navigator / GR-303 Host with P-PhoneManagement ArchitectureManagement ArchitectureAccess Navigato

Seite 676

Access Navigator - Release 1.8 August 2003 4-9 Access Navigator / GR-303 Host with P-PhoneFDL ManagementFDL ManagementWhen T1 Type I lines are availa

Seite 677

4-10 August 2003 Access Navigator - Release 1.8Access Navigator / GR-303 Host with P-PhoneConfigurationConfigurationThe Access Navigator / GR-303 Host

Seite 678

Access Navigator - Release 1.8 August 2003 4-11 Access Navigator / GR-303 Host with P-PhoneApplicationsApplicationsl T1 Service POP-In-A-Box: Custome

Seite 679

4-12 August 2003 Access Navigator - Release 1.8Access Navigator / GR-303 Host with P-PhoneSpecificationsSpecificationsGR-303 Operationl Up to 32 T1s p

Seite 680

Access Navigator - Release 1.8 August 2003 4-13 Access Navigator / GR-303 Host with P-PhoneGR-303 SignalingGR-303 Signalingl GR-303 ABCD robbed-bit s

Seite 681

4-14 August 2003 Access Navigator - Release 1.8Access Navigator / GR-303 Host with P-PhoneComplianceComplianceUSAl UL 1950, 3rd Editionl FCC Part 15,

Seite 682 - Glossary

Access Navigator - Release 1.8 August 2003 4-15 Access Navigator / GR-303 Host with P-PhoneCompliance RequirementsCompliance RequirementsFCC Requirem

Seite 683 - Numerics

1viii August 2003 Access Navigator - Release 1.8Preface(INCLUDING NEGLIGENCE, CONTRACT AND TORT), EVEN IF LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY

Seite 684

4-16 August 2003 Access Navigator - Release 1.8Access Navigator / GR-303 Host with P-PhoneTelcordia (Bellcore) Requirementsprovide advance notice in o

Seite 685

Access Navigator - Release 1.8 August 2003 4-17 Access Navigator / GR-303 Host with P-PhoneCSA RequirementsCSA RequirementsThis telecommunication net

Seite 686

4-18 August 2003 Access Navigator - Release 1.8Access Navigator / GR-303 Host with P-PhoneOrdering Information

Seite 687

CHAPTERPhysical InstallationIn this Chaptern Compliance and Safety Requirements ... 5-2n Tools and Materials ... 5-3n Unpacking and Inspection ...

Seite 688

5-2 August 2003 Access Navigator - Release 1.8Physical InstallationCompliance and Safety RequirementsCompliance and Safety RequirementsDANGER! FIRE

Seite 689

Access Navigator - Release 1.8 August 2003 5-3 Physical InstallationTools and MaterialsTools and MaterialsPhysical installation requires the following

Seite 690

5-4 August 2003 Access Navigator - Release 1.8Physical InstallationHorizontal 19-Inch Rack MountHorizontal 19-Inch Rack MountInstallation Summaryn Pre

Seite 691

Access Navigator - Release 1.8 August 2003 5-5 Physical InstallationAttach Mounting Brackets to Access NavigatorAttach Mounting Brackets to Access Nav

Seite 692

5-6 August 2003 Access Navigator - Release 1.8Physical InstallationAttach Access Navigator to Equipment RackFigure 5-2. Installation in 19-inch Equipm

Seite 693

Access Navigator - Release 1.8 August 2003 5-7 Physical InstallationHorizontal 23-Inch Rack MountHorizontal 23-Inch Rack MountInstallation Summaryn Pr

Seite 694

Access Navigator - Release 1.8 August 2003 1ixPrefaceWarrantyCarrier Access Corporation conditionally warrants to BUYER that PRODUCTS are free from su

Seite 695

5-8 August 2003 Access Navigator - Release 1.8Physical InstallationAttach Mounting Brackets to Access NavigatorAttach Mounting Brackets to Access Navi

Seite 696

Access Navigator - Release 1.8 August 2003 5-9 Physical InstallationAttach Access Navigator to Equipment RackAttach Access Navigator to Equipment Rack

Seite 697

5-10 August 2003 Access Navigator - Release 1.8Physical InstallationAttach Access Navigator to Equipment Rack1. Access Navigator requires at least 4.3

Seite 698

Access Navigator - Release 1.8 August 2003 5-11 Physical InstallationVertical Rack Mount Using CrossbarsVertical Rack Mount Using CrossbarsInstallatio

Seite 699

5-12 August 2003 Access Navigator - Release 1.8Physical InstallationInstall CrossbarsInstall Crossbars1. Position Vertical Mount Crossbars (refer to o

Seite 700

Access Navigator - Release 1.8 August 2003 5-13 Physical InstallationAttach Access Navigator to CrossbarsFigure 5-7. Crossbar InstallationFasten Cross

Seite 701

5-14 August 2003 Access Navigator - Release 1.8Physical InstallationAttach Access Navigator to CrossbarsFigure 5-8. Bracket InstallationFigure 5-9. Sp

Seite 702

Access Navigator - Release 1.8 August 2003 5-15 Physical InstallationVertical Wall MountVertical Wall MountNOTE: The following procedure assumes that

Seite 703

5-16 August 2003 Access Navigator - Release 1.8Physical InstallationTools and MaterialsTools and MaterialsObtain the following tools and materials:• P

Seite 704

Access Navigator - Release 1.8 August 2003 5-17 Physical InstallationAttach Access Navigator to PlywoodAttach Access Navigator to Plywood1. Position A

Kommentare zu diesen Handbüchern

Keine Kommentare